About Me:
Drone Rookie!
About
Please tell us a bit about your UAV interest
Mainly interested in quadrotors
Hometown:
Winchester
Activity Feed
"Thankyou all for the replies! I see now how I might do it. Im guessing the trick is spacing!!"
"Anyone?"
I don't know if anyone else has had this problem.. But How would you mount the APM on the Arducopter kit frame in X mode? I am having problems with the bars interfering with the pins, So i can't actually plug anything in.Can anyone please upload a…
"Hi Guys,
I'm Currently testing Martin's telemetry setup with my Spectrum Dx6i and Dx7i at the moment!
Initial thoughts is that it just took 1 click of a button to setup.
The xbee module is a 2.4ghz Xbee Pro, And there is no interference with my…"
I'm Currently testing Martin's telemetry setup with my Spectrum Dx6i and Dx7i at the moment!
Initial thoughts is that it just took 1 click of a button to setup.
The xbee module is a 2.4ghz Xbee Pro, And there is no interference with my…"
"I managed to downgrade my board and got it to show the message that I wanted, HOWEVER, it does register any signal from my RX. I have tested this with motors and it works fine. Any ideas now? Also Interestingly the esc and motors respond when i move…"
Hi, Im new here. This is my first setup of the arducopter and I cant get the radio setup in the CLI to work! Normally after you type radio into the CLI it should say... "Put your sticks to the extreme (or something along those lines) " But it does…
