About

Location

Minas


Please tell us a bit about your UAV interest

3DR and mapping


Hometown:

Brazil


Activity Feed

Russ replied to Anjum Shariff's discussion Intelligent follow algorithm in PIXHAWK
"Hi Anjum if you command the drone to go to the current GPS position of the car, the robot will always be behind of the car because the drone will take some time to reach that position and the car will be moving.
By sending a 'predicted' future…"
Nov 21, 2016
Russ replied to Anjum Shariff's discussion Intelligent follow algorithm in PIXHAWK
"Hi Anjum, just sending the GPS points at a fixed interval with a correction speed is not enough? I did it before to follow a person with a GPS in hand using the Dronekit API for Python. Every X seconds the GPS connected to a XBEE sent the data to a…"
Nov 17, 2016
Russ replied to Russ's discussion High vibration in Z - Mission Planner in ArduCopter User Group
"Thank you for your response Clifton, I did some upgrades: a Lidar and the new firmware 3.4.1 and it helped a lot. I know now that the vibration was within limits, but now the copter is more smooth.
Can you tell me if the Z vibration is yaw or…"
Nov 13, 2016
Russ replied to Russ's discussion High vibration in Z - Mission Planner in ArduCopter User Group
"Clifton Hipsher said:
Please define "high vibrations".  Posting a log will help...




Like when the vibration bar is between the 2 red lines. What does it mean? 
A log is on attached files!

Screen Shot 2016-11-03 at 20.19.26.png2016-10-21…"
Nov 3, 2016
Russ posted a discussion in ArduCopter User Group
Hi,I`m having a high Z vibration as shown in the Mission Planner vibe panel. The octorotor (a X8+) is flying fine.I would like to know what exactly means a high vibration in the Z axis? Its related to the roll, pitch or yaw? Or is more like thrust…
Nov 2, 2016