Hi All,
I think it’s time to upgrade my motors and ESC’s. I am new to the electric hobby, so when looking at new motors, and comparing them I really don’t know what to look for.
What I have now:
APC 12x3.8 Slow Flyer
TR2217/20 Turnigy 2217 20turn 860kv 2
Will there be a LabVIEW GCS and Mission planner for the ArduCopter?
Thanks,
Scott
Read more…I have some questions, but first let me tell you what I have done so far. I have my arducopter assembled, all ESC’s calibrated with the following calibration:
ESC Tower Pro w25 settings Brake-off, Battery type-Li-Poly, Cutoff Mode-Soft, Cutoff Thre
Read more…Quick question I am ready to cal my ESC’s again. But I do not want to blow it up again. I was thinking of unsoldering SJ1 and powering the board with usb Also I would be able to see the cal with the configurator. Then power the ESC’s and receiver wit
Read more…I was trying to cal my ESC's. having a hard time because the ESC's are powering the board. So I thought to myself (never a good idea ) why not run power to it directly. I had a servo wire lying around so I put +V to the red and -V to the black. plug
Read more…I have uploaded the code to the APM. The board is on a flat and stable surface. When I start the serial monitor I will receive a high accel Z, as you can see here.
2061,2016,2456,1673,1678,1680,1578,2828
Is there anything wrong?
If not can it be cali
Read more…