Gender
Male
About
Location
Singapore
Please tell us a bit about your UAV interest
.
Hometown:
Singapore
Activity Feed
"Will do! Thanks. We will try to mount the lidar as soon as possible and take it to fligjt"
"Pwm. Actually i found out the issue. Apparently i had to connect the bec to the aux 1 because even when esc is powering to the pwm 1 to 8 pins it still does not work. Apparently when connecting battery and bec to aux 1 it works well now."
"I got it and installed it to the pixhawk but it is not providing the values for sonarange. I believed the connection for the wires are correct. Red (5v), Black (Ground) and Orange (power enable) to aux 6 and yellow (mode control) with resistor to…"
Hi guys, we are doing a drone which has 12 motors, 6 on top and 6 below acting as a coaxial configuration. I would like to seek assistance for configuring such drone in mission planner.
Hi guys, we are building a 12 rotor copter but mission planner does not have the frame type for the 12 rotor. I would like to seek assistance for configuring this 12 rotor motor. Thank you.
