Gender
Male
About
Location
Mumbai
About Me:
Electronics Engineering student
Please tell us a bit about your UAV interest
The interest of UAV became passion & now gone to a new level of curiosity
Hometown:
New Delhi
Activity Feed
"Use better dampers. Silicone rubber ones will be good"
"Initially, anything upto 200-400 m"
Hi allI need to transmit HD video (720 p) and audio over RF.Something similar to FPV. I was looking for Insight HD video telemetry from foxtech fpv, but it doesn't send audio.Any inputs???
"Wooh! This sounds interesting, I also train young engineering students, this mat idea is actually nice. Thanks for the idea Mr. Forrest."
"Forrest is correct.
And it is better for you to initially fly in Stabilize mode only, it will be very helpful in handling.
Hope you got ur solution. Forrest Frantz said:
It is normal for the ship to not allow you to arm after a "normal" period of…"
And it is better for you to initially fly in Stabilize mode only, it will be very helpful in handling.
Hope you got ur solution. Forrest Frantz said:
It is normal for the ship to not allow you to arm after a "normal" period of…"
"Arey yaar, trims centre par rakh, fir RC CALIBRATION kar, then arming disarming try kar. Or trims bilkul b mat change kario kbi b. Or esc Calibration b kar lio rc calibration k Baad."
"Ok, I got it
Stopping of motors is not a problem, motors usually stop spinning and disarm after a fixed time period, if the vehicle is on the ground at the level surface.
Now, the thing is, if two motors are spinning slowly at ARMED condition, then…"
Stopping of motors is not a problem, motors usually stop spinning and disarm after a fixed time period, if the vehicle is on the ground at the level surface.
Now, the thing is, if two motors are spinning slowly at ARMED condition, then…"
"What do you mean Throttle is reverse?"
"While doing rc calibration , trims and sticks must be at centre"
"Try doing first rc calibration and then ESC with same saved rc channel's min max values. It should work"
"Do esc Calibration of each motor"
