Gender
Male
About
Location
Chesapeake, VA
Please tell us a bit about your UAV interest
I was an external pilot in the Navys UAV program in Pax River
Hometown:
Chesapeake, VA
Activity Feed
"Hi Leonard,
I was thinking about this throttle glitch while I was laying in bed last night. I don't see how it can be a glitch as this has shown up as a un-commanded throttle cut every time. A glitch would randomly hit different channels or effect…"
I was thinking about this throttle glitch while I was laying in bed last night. I don't see how it can be a glitch as this has shown up as a un-commanded throttle cut every time. A glitch would randomly hit different channels or effect…"
"Hello All
I hope someone can help me.
I have erased the memory several times, on my APM 2.5+ runing 2.9.1, and done a re-config but two terms keep coming up blank.
The two terms are under Thrust Rate and show up as below
Thrust Rate P…"
I hope someone can help me.
I have erased the memory several times, on my APM 2.5+ runing 2.9.1, and done a re-config but two terms keep coming up blank.
The two terms are under Thrust Rate and show up as below
Thrust Rate P…"
"Hello all, I hope I have finally found the right place to get help....I am very frustrated and it is probably my own doing and not understanding how to find the info I am looking for. I am not new to multi-rotors, but new to ardupilot. I have…"
"Went into the CLI and did a eeprom erase and a factory reset and the baro altimeter seems to be functiioning ok now.
Different question. Is these a way to reset (calibrate) the altitude to reflect the current pressure at the area you are…"
Different question. Is these a way to reset (calibrate) the altitude to reflect the current pressure at the area you are…"
note: I hope I have put this in the right placeDo not know what has happened. But this last time I powered up the GCS the ardupilot is is showing -70.xxx mil feet. When I look at the raw data, it reads -7.04555EIt had properly indicated prior to…
