About Me:
Flying RC helicopters for 5 years and FPV for a year now. I'm interested in programming microcontrollers and build custom electronics around them.
About
Please tell us a bit about your UAV interest
I'm interested mainly in flying FPV but with a custom build OSD & autopilot.
Activity Feed
"I've made an other short video showing the OSD with the Xplane and GE view underneath:"
"I'd like to sing in the contest too!
Setup details:
The flight was fully autonomous (including takeoff and landing) using the Crash 4 Sure autopilot and OSD system. We're using our own application to adjust and make plans for the autopilot.…"
Setup details:
The flight was fully autonomous (including takeoff and landing) using the Crash 4 Sure autopilot and OSD system. We're using our own application to adjust and make plans for the autopilot.…"
"I can't imagine programming without debugging. Really. Arduino is made for those, who want to punish themselves especially with complex projects.
CooCox is a nice IDE, it's simple, works great, the debuggers are cheap for it, but hardcore…"
CooCox is a nice IDE, it's simple, works great, the debuggers are cheap for it, but hardcore…"
"I'm sorry to read this post, you've made many fantastic and useful programs in the past few years. I hope you won't give up everything because of this mishap. There must be a solution to build a program without the source included. Nobody would…"
"Don't limit the throttle, it won't solve anything. Use a smaller prop instead.
I would also check the timing and PWM settings in the controller. If they are not correct, efficiency can drop and the motor will generate more heat, even with the same…"
I would also check the timing and PWM settings in the controller. If they are not correct, efficiency can drop and the motor will generate more heat, even with the same…"
"In this case an open source, software based OSD would be much reasonable.
For exaple: http://www.rcgroups.com/forums/showthread.php?t=1290963"
For exaple: http://www.rcgroups.com/forums/showthread.php?t=1290963"
"Try Remzibi concept - open shematics, closed source
We're want to do it exactly the same way. FYI it's hex only AND locked, so you can't program an other controller with the provided hex file, only the ones which you buy from Remzibi. The point is,…"
We're want to do it exactly the same way. FYI it's hex only AND locked, so you can't program an other controller with the provided hex file, only the ones which you buy from Remzibi. The point is,…"
"For now, it's only a hobby project. We're working on it and will see what happen.
If it'll be good enough, we would sell it.
If it won't be so good, competitive, if we don't have enough time or simply loosing interest, then we will publish…"
If it'll be good enough, we would sell it.
If it won't be so good, competitive, if we don't have enough time or simply loosing interest, then we will publish…"
"Is video getting on and off the board through the ribbon cable?
To be more precise, there is an other 2x3 pin connector at the bottom of the board, facing forward. The board is secured by two C shaped guides glued in the canopy, so the whole thing…"
To be more precise, there is an other 2x3 pin connector at the bottom of the board, facing forward. The board is secured by two C shaped guides glued in the canopy, so the whole thing…"
A few months earlier, mmormota and I have started to develop a combination of autopilot and OSD. We're made it for FPV purposes mainly, but you may have found it interesting because of the autopilot part. We've just accomplished our first flight…
