About

Gender

Male


About Me:

Engineer in the USA flying drones for fun!


Please tell us a bit about your UAV interest

Fixed wing, multirotor, autopilots, controls systems, UAV Challenge.


Hometown:

USA


Activity Feed

Ted M replied to Kyuhyong You's discussion External LED schematics available?
"Late reply but might help someone else. This sounds like a power supply issue based on the RED LED only lighting. Check the voltage going into the circuit, should be 4.7V or more.- ted"
Jun 5, 2018
Ted M replied to Grant Petty's discussion Has anyone assembled this fixed-wing UAV airframe (Hugin 2.6m)?
"Grant, glad your maiden went well. This plane is definitely not for beginners. 
Moving the main wheels closer to the CG is OK, if you're sure about your CG location. The gear should always be in front of the CG by some margin to encourage the nose…"
May 24, 2018
Ted M replied to Grant Petty's discussion Has anyone assembled this fixed-wing UAV airframe (Hugin 2.6m)?
"Grant, you've probably flown the plane by now, how was your experience? 
I have the inverted V-tail version of this vehicle with a dozen flights on it. Runtime is about 30 mins with 6s 10Ah batteries. Top speed with 12x8 APC prop is 76 mph without…"
May 24, 2018
Ted M replied to Christian Mauch's discussion Safety First: 100A & 200A Hall Sensor with BEC for Pixhawk / APM
"Hi Christian, Thank you for developing this current sensor module, I appreciate the workmanship and design. Have you tested this module at 200 amps, and high voltage such as 12s LiPO battery or 50 Volts DC? 
This reference chart shows a temperature…"
Mar 11, 2018