Gender
Male
About
Please tell us a bit about your UAV interest
Yes I'm interested in UAVs :P
Hometown:
Kinsgfield
Activity Feed
FLYING drones fitted with heat-seeking cameras are being used by criminals to find cannabis farms in Halesowen, Cradley Heath and Oldbury so they can steal the crops.The explosion in the number of cannabis farms has led to countless violent…
"PLA is made from starch and it's biodegradable: https://en.wikipedia.org/wiki/Polylactic_acid"
"@Aran no because there are different SBAS systems around the globe and you have to select the one that you want to use.
http://en.wikipedia.org/wiki/Satellite-based_augmentation_system#Sa...
and configure your ublox with a serial adapter and the…"
http://en.wikipedia.org/wiki/Satellite-based_augmentation_system#Sa...
and configure your ublox with a serial adapter and the…"
"@Aran: have you tried enabling EGNOS?
http://www.navilock.de/dyn/faq/uBloxEgnos.jpg"
http://www.navilock.de/dyn/faq/uBloxEgnos.jpg"
"A friend gave me his but now I get strange current readings in Mission Planner:
http://www.diydrones.com/forum/topics/wrong-amps-and-battery-percen...
When the short circuit happend, the ESC Power was connected to the output rail.
Could that have…"
http://www.diydrones.com/forum/topics/wrong-amps-and-battery-percen...
When the short circuit happend, the ESC Power was connected to the output rail.
Could that have…"
"Not directly related to this problem but the cable that came together with my power module had it's crimped connections stick out of the plug and made contact to another which resulted in a little puff of smoke and a dead power module, luckily it…"
"Using DroidPlanner I noticed the load percentage starts at 100% after an APM boot and then drops to 0% after 2 minutes while the voltage stays the same.
So obviously not a problem with MP.
What parameter need to be written to the APM2.5 for the…"
So obviously not a problem with MP.
What parameter need to be written to the APM2.5 for the…"
Mission Planner shows me the correct voltage but 85 A and 0%.Here are the settings for the battery monitor:I'm using the original 3DR power module and measured 4.76V behind the fuse.I'm using a separate SBEC on the output rail and removed the red…
Just got my first ardupilot (APM 2.5) :)I've put it to work in my trusty HawkSky and the first test flights were very promising!Stabilize, FBA and RTL worked flawless out of the box.Everything is working except the dataflash.When I open the console,…
