Gender
Male
About
Location
London
Please tell us a bit about your UAV interest
UAV
Hometown:
L
Activity Feed
"its just a challenge for me :)no problem IR Lasers, laser diode array etc. Main problem is optical modem design in my opinion"
"80m (262 feet) not enough :) "
"No, there is not any ir jammer. I know, IR is optical but I have to reach jammed area . I mean, I need very powerful IR LED array :)"
"Andrew: what about the range? jammer easily reach to 1000m or more"
"Hi Aytek,
We couldnt talk for a long time :)
Unfortutely optical flow working range in too low :(
Ordinary jammer block 2.4-2.5GHz WiFi 11.g, b, Bluetooth, 1570-1620MHz GPS L1 + GLONASS L1 , 5.7GHz-5.9GHz WiFi 11.a, 900MHz 860-930MHz, 433/434MHz…"
We couldnt talk for a long time :)
Unfortutely optical flow working range in too low :(
Ordinary jammer block 2.4-2.5GHz WiFi 11.g, b, Bluetooth, 1570-1620MHz GPS L1 + GLONASS L1 , 5.7GHz-5.9GHz WiFi 11.a, 900MHz 860-930MHz, 433/434MHz…"
"Hi Jordan,
Jammers already works on 4G LTE networks, LTE uses spread spectrum :)
what does "Dead reckoning might be good enough for jazz" mean? jazz?"
Jammers already works on 4G LTE networks, LTE uses spread spectrum :)
what does "Dead reckoning might be good enough for jazz" mean? jazz?"
Hi everyone, I just made a bet with some local professional jammer manufacturer who is too confident with their product. I'll take them out if I can manage a flyaround over their premises.Their product is no joke though. As far as I could…
"Perhaps the direction of the propeller is wrong?"
"Hi Denis,
Its cool in my opinion. What about the weight?"
Its cool in my opinion. What about the weight?"
"Thanks Patrick, I can share .STL file with you or on thingiverse. "
"@Patrick
I just finish prototype of my diy-hdlinkCompute Unit: Rasberry PI 2 Camera: Rasberry PI CameraWireless: 802.11ac (approx. 625mW)Power input: 7-26V"
I just finish prototype of my diy-hdlinkCompute Unit: Rasberry PI 2 Camera: Rasberry PI CameraWireless: 802.11ac (approx. 625mW)Power input: 7-26V"
"@TobiasActualy I want to use Headplay HD Goggles by Rangevideo. Its only has HDMI input for digital video. I think RPI2 and gpu acceleration supported video player (such as omxplayer,vlc etc)can handle it."
"@PatrickI saw ampedwireless.com's products. Cool enough. I hope, I will share some pictures and spec of my project with you on next week.
By the way, did you try Raspi to Raspi gstreaming before? I have tried but my result is too bad. very slow,…"
By the way, did you try Raspi to Raspi gstreaming before? I have tried but my result is too bad. very slow,…"
"Yes, I have found alot of wifi booster too. All of them huge size and not suitable for multicopter usage in my humble opinion. I have shrinked all items in the 90 x 60 x 30mm box and its aprox. 115gr I mean RASPI2 + PiCam + 802.11a with dual 5 dBi…"
"@PatrickIm using ordinary hardware too. RaspberryPI2, Picam, Realtek8812AU chipset etc. I just working on analog RF signal boosting. My plan and target is real 32-33dBm output power for standart 802.11ac All ordinary hardware is cool for my project…"
"Thank you very much Patrick, I'll try and inform you. By the way, Im actualy a hardware designer and Im working on a 802.11ac based HD Link project. Can I call you again some software question and support :) Its just a non profit making, an open…"
