Gender
Male
About
Location
Merida
About Me:
i'm electrical engineer, and i work in computer vision.
Please tell us a bit about your UAV interest
aerial photography and video.
Hometown:
Merida
Activity Feed
"Hi all,i tested "MultiSerialMega" with Serial and Serial3 at 9600 baud, i received "Port 0" in both case, from USB and then from wireless when power by battery. So, i want to set Telemetry in Serial port.
I have to do 2 change. First, set Serial…"
I have to do 2 change. First, set Serial…"
"I mean, when load firmware, usb port (serial0 or just serial) is set to 115200, so to use wireless module i need 9600 baud on serial0 port, but i didn't find how set this parameter in Planner software neither in code."
"Hello Miwa,
i tested "MultiSerialMega" with both port in 9600, i received "port 0" in both case, first from USB, and then from wireless when power by battery.
i don't know where change serial baud rate, i have downloaded code from repository.…"
i tested "MultiSerialMega" with both port in 9600, i received "port 0" in both case, first from USB, and then from wireless when power by battery.
i don't know where change serial baud rate, i have downloaded code from repository.…"
"@Anish
interisting, what king of problem they are having?
@Sebastian Gralla
it's seem to be insignificant but each Watt should be save.
@Hugo Vincent
my mistake, fixed, thank you.
@Doug Weibel
You are right, from prototype or design to massive…"
interisting, what king of problem they are having?
@Sebastian Gralla
it's seem to be insignificant but each Watt should be save.
@Hugo Vincent
my mistake, fixed, thank you.
@Doug Weibel
You are right, from prototype or design to massive…"
It was an issues of time to build a 9-axis sensor in one chip, and Invense did it again.http://invensense.com/mems/gyro/mpu9150.html I read somewhere that people are working to build an Ardupilot with ARM CPU, so i'm thinking in image or video…
