Gender
Male
About
Please tell us a bit about your UAV interest
Hexa copters
Hometown:
Holland
Activity Feed
Dear all,a few weeks ago I bought these OSD and made thisI have a small manual for the power and 5v+ connectionssee in the picture, I have adapted the picture with blue and red text in the bottom righthope that helps a…
"it is resolved by changing the bootloader.
This was not good anymore boot loader is deployed via a ardriuno uno and everything works again.
Hope you can solder properly. because you do not have much space and the PCB tracks are very sensitive and…"
This was not good anymore boot loader is deployed via a ardriuno uno and everything works again.
Hope you can solder properly. because you do not have much space and the PCB tracks are very sensitive and…"
"I have the same problem with this apm. after linking with mission planner is only the green power LED on via USB. and the PC recognized still the ATmega2560 and the com port. but connect does not work and I get connection error.I tried a firmware…"
