AP-202 is a professional flight control & navigation system products that has peripheral interfaces and rugged structure.It is a perfect partner for applications such as;
●Flight control and navigation for professional UAV ( including fixed wing and helicopter )
●The platform integrating sensor/airborne computer/data acquisition recorder for fight test
●Airborne platform of aircraft parameter identification test
●Flight control & navigation system of general aviation purpose
Features:
●Integrated with high-precision IMU combined module, high-precision static and
dynamic pressure sensor, high-precision magnetic sensor and high-precision GPS module. The attitude error is less than 0.2 degrees.
● Centimeter–level position/height precision, supporting the landing roll of fixed and
moving platforms and a variety of precise recovery modes, such as net-recovery, mid-air
cabling etc..
●Use of high–performance GPS/SINS/AHRS fusion algorithm with update frequency of
200 Hz enables automatic switching to AHRS mode in case of poor GPS signal.
●The speed and location can also be calculated in the AHRS mode. The calculation error of location is less than 1 km when there's no GPS signal for 20 minutes.
● Communication interfaces such as CAN, RS232, RS485, RS422, input/output interface
(up to 32 channels ) and 6 channel - 16 – Bit AD are available for users.
●Provides standard interface protocol to support the flight simulation of hardware in
the loop.
Comments