The wires don't matter. If the prop spins the wrong way, just switch two wires (doesn't matter which). As for moving the ESC, you need to lengthen the leads (solder on longer wires). Either that or move it inside the fueslage (ideally with a ventilation hole)
oh and can you help me with my ESC? i dont know what wire goes to what. The motor wires are red, black and yellow so those are easy. But the ESC is just all black. There are A,B and C labels on each wire but i dont know where they go. I was think a volt meter would figure it out, is that correct?
The sensor needs an unobstructed view of the horizon on both directions and should be parallel with the forward motion of the plane. We mount it diagonally so its view isn't blocked by the tail, but the way you've got it it's blocked by the whole fuselage, starting with the canopy (the sensors have a >90 degree field of view each)
Comments
how could i move it?