Full FPV Ready Tricopter ADAV v3:
Setup:
- Flight controller: KKmulticopter "blue board" with Atmega 168
- Firmware: XXcontroller_KR_1_4b (JLN version)
- Rembizi OSD with GPS
- Sony CCD camera 500H*582V (420TV lines)
- lens 3.6mm
3 brushless outrunner DualSky 2826CA 150W 1200 KV
- Lipo Turnigy NanoTech 3S 2200 mAh
- Archos Groundstation
More infos at:
Comments