Successful tests flights of the Arducopter firwmare v2.0.51
done on november 27, 2011 by Jean-Louis Naudin
Hardware Setup:
ArduMega 2560 + IMU Shield
- HMC5843 magnetometer
- GPS Mediatek MTK 16 (10 Hz)
- firmware Arducopter V2.0.51 (original version)
- Receiver: Turnigy 9X8C v2
- Transmitter: Turnigy 9x
- four brushless motor RC Timer BC-2836/11 (750 KV)
- two CW propellers 12 x 4.5
- two CCW propellers 12 x 4.5
- fours ESC 40A RC Timer speed controller
- one Lipo battery 3S Turnigy Nano-Tech 2200 mAh
- Take Off Weight (TOW): 988 g without payload
- Flight time: about 10 min
more infos at:http://diydrones.com/profile/JeanLouisNaudin
Comments