I submitted final revision to oshpark for a board run today
the rest of the parts should arrive this week for the batch in production
Here is a video of the prototype mockup:
The board consists of :
2x 10mm super bright 20ma red & blue led's
1x 12mm 5v active 89db buzzer module
2x .5watt 330ohm resistors (or 220ohm)
It's also capable of taking smaller smd leds also as the pad/hole spacing matches most types (may require different resistors to correspond with led used)
Comments
Ahh yeah active is the key, the one for the KK2.0 will work if you happen to have one around
NVM I finally realized the key word is "5V Active Buzzer". I was wrongly using a buzzer from a computer and a LiPo alarm.
Sweet PCB! Its very clean.
Anyone have issues with the buzzer? My APM buzzer just makes a quiet click instead of a beep. I tested two different buzzers and double checked polarity.
The board measures 2.11x0.76 inch (53.62x19.30 mm) in size
with M4 mounting holes
I haven't got any replies to the idea that was made by me yet
Have you thought about asking 3dr if they would produce it and sell it in their store ?
yeah I would probably want to buy one of these pcb's if you had a an extra
I'm working out the logistics for pricing (including shipping for USA & Canada) and a small increase for international buyers
I have someone in the USA that will also handle US shipping & sales if this becomes larger than expected, it was just to learn eagle at first and provide a led solution for a few people & myself, but the onslaught of pm's and email are growing
It can be placed on an arm or rear of the aircraft or even underneath, wherever its best viewed for your flying style
I am working on funds to produce a larger batch from http://imall.iteadstudio.com/open-pcb/pcb-prototyping.html
aswel, they have pretty good prices I find
-
1
-
2
-
3
of 3 Next