@Tychoc. You appear to have one of the batch of the first 16 that the factory forgot to load the firmware in the attiny. Please see the update on this original post for instructions.
Yes, me to having that problem. You can read here http://www.rcgroups.com/forums/showthread.php?t=979372&page=10
about 16 units effected included me. For me buy the AVR programmer or send ardupilot back to USA (Sparkfun) its just like I buy a new ArduPilot. :(
Welcome Limaeim! Right now our top code priorities are better navigation routines, a ground station, and adapting the code to directly read the FMA thermopiles to be a stand-alone autopilot for 3-channel planes.
Hello,
Imed from Paris, I ordered 2 boards in backorder on the 7th of January and I get them today (24/01/2009) !
All seems OK!
Now I will have a look at the code.
@Chris and Jordy thank you for the great job and the passion your are communicating throw this blog ! Really impressed about the details level and the quality of the posts. Well, I have been following the project since the beginning but I have never posted any comment. I have high programming capabilities and experience in complex I&C. Since it is an Open Source project I will be happy to have at least a small contribution ... But before I have to spend little time to understand the Code architecture !
Are there any special needs for programming ?
imed limaiem From Paris (France)
Thank you again
Yes, we still have some work to do smoothing navigation, including cross-track errors (XTEs). It shouldn't be a problem to implement, just haven't got to it yet. Is this something you can help with? We're always looking for more people to contribute to the core code base!
Comments
about 16 units effected included me. For me buy the AVR programmer or send ardupilot back to USA (Sparkfun) its just like I buy a new ArduPilot. :(
Imed from Paris, I ordered 2 boards in backorder on the 7th of January and I get them today (24/01/2009) !
All seems OK!
Now I will have a look at the code.
@Chris and Jordy thank you for the great job and the passion your are communicating throw this blog ! Really impressed about the details level and the quality of the posts. Well, I have been following the project since the beginning but I have never posted any comment. I have high programming capabilities and experience in complex I&C. Since it is an Open Source project I will be happy to have at least a small contribution ... But before I have to spend little time to understand the Code architecture !
Are there any special needs for programming ?
imed limaiem From Paris (France)
Thank you again
redirect here: http://diydrones.com/profiles/blog/list
Is this the correct link?
It is redirected to a list of all forums.
Is this because there is a new version of the FMA, or is this a bug?
Also, is there somewhere to get the Hobbico Superstar 40 shipped to Canada?
Thanks...
Yes, we still have some work to do smoothing navigation, including cross-track errors (XTEs). It shouldn't be a problem to implement, just haven't got to it yet. Is this something you can help with? We're always looking for more people to contribute to the core code base!
-
52
-
53
-
54
-
55
-
56
of 62 Next