For anyone using Mission Planner as a ground control station, check out these additions we've made to streamline MP to our workflow. We typically run mapping missions on fixed wing aircraft at Event 38, so these are tailored to that use, but some of our features are more general purpose. I'll outline the features we've added below and open up to comments about what you think should be merged into the master Mission Planner codebase. Let us know what you want!

Automated Pre-flight Checklist

We’re finally coming out of the dark ages, no more paper checklists! Mission Planner already has all telemetry data at its disposal, why not have it help check off setup criteria too? While the E384 boots up and self checks out each subsystem, the operator goes through the physical inspection and completes the checklist. Green means go!


Accessible Flight Planning Functions

To improve the speed and ease of planning a mapping mission, we’ve taken the most common functions from Mission Planner’s right click menu and made them more accessible by placing them in the right hand pane in the Flight Planning tab. Sometimes the most simple changes can be the most appreciated!


Cam Message Indicators

Mission Planner now leaves a trail of markers where each picture was taken, making it simple to tell when an area is not being covered as expected. If the aircraft is at a high pitch or bank angle when the picture is taken, the icon appears yellow to warn you that additional coverage in the area may be needed.


There are a few more updates, admittedly more specific to the E384 platform, but feel free to check out the full list here on Droneyard. We're in the process of joining the Dronecode foundation and will work with the dev teams to get these features integrated into the next Mission Planner release. In the meantime, feel free to check out our source code on github, or just go ahead and use our compiled version right away if you want (Click Mission Planner for Event 38 at the top of the page).

E-mail me when people leave their comments –

You need to be a member of diydrones to add comments!

Join diydrones


  • Thanks everyone!

    @Alexandre - we want the footprints too, but we find that there's too much delay between a camera message and the actual picture being taken. We're characterizing that delay and may be able to add such a feature in the future if it's consistent. The tenths of a second between cam message and shutter click make a big difference in orientation in some cases.

    @Graham - looks like a security/administrator issue with Windows, I'll send you a message with a suggested fix.

  • Developer

    Thanks Jeff. That is looking good.

  • Moderator

    Would love to try it out but the E38 Mission Planner won't start after install, also access to all the folders and files are permission denied.

    Now I can't uninstall it or repair it:


  • Awesome work.

  • Very nice. Congratulations!

  • Moderator

    Nice work Jeff!

    To the future updates i suggest show the footprints shapes in real time too :) 

  • Moderator

    Nice one Jeff, success with RPAS is borne of careful planning and checking each step. This will help no end 

  • Awesome work, Jeff!

  • excellent, very good contribution. These are details that facilitate mapping missions.



  • As usual, great contributions Jeff.

    Congratulations to all Event38 team.

This reply was deleted.