Exmaps: Online Flight Logbook for Ardupilot Update #2

3689624981?profile=original

First of all thanks for all the feedback .We have been busy improving the system and today I am pleased to announce the following:

- Support for Tlog, Log and Bin. We also unify the upload boxes into 1 but to do this we had to drop support for logs without GPS Week. 
- Flight modes for Tlogs.

- Able to process logs without account. We felt that there are people who just want to process 1 log or try out the system without signing up. So we have implemented a public log upload ability at the front page.
3689624904?profile=original

- Auto scaling of data points according to flight time hence short flights will produce sensible graphs and long flights will have data trimmed. 

- Battery information such as mAh, Average current with ability to summarised by modes. 
3689625003?profile=original
Total mAh is important because actual flight time is not dependent on how much mAh that is stated on your battery pack but rather how much useable mAh there is. There are many reasons why useable mAh is way below rated mAh.
i) Your battery manufacturer lied on the rating
ii) You are drawing high Amps. Ratings are measured using discharge 1C. 
iii) Battery is old
iv) Your personal rule for cut off voltage per cell is above 3.0v. 
Looking at average Amps drawn together with Total Amps also allow you to quantify the improvement if you upgraded the battery. 
We also introduce mAh/km information. We think this is important if you are planning to do straight line flights like drone delivery, mapping. What is important is how efficient your platform is. Ideally if you upgrade your motor/propeller/battery etc, your goal is to minimise mAh/km for the same payload. This is also similar to cars which use km/litres. It offers a baseline understanding of fuel efficiency between car models 

- Flight details such as average speed, distance travelled summarised by flight modes. Most UAVs are switched on (manual mode) but not flying hence data for all modes might not be relevant. Filter to the mode that you want to understand. 

- Error messages are now plotted on map and shown on log list page.

3689624916?profile=original

(Map shows throttle failsafe error, later deduced to be 2.4Ghz jamming in the area) 

- Ability to download uploaded logs

- Ability to sort flights by date

- Improved UI and backend

Thats all for this update. The service is free at www.exmaps.com . I hope you give it a try and let us know how to improve. Meanwhile, fly safe!
E-mail me when people leave their comments –

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • Very well done Weiliang! Polished interface and love the batch uploading feature.

    Any chance of displaying battery mAh data from .log files? This is due to not always flying with a GCS connected to generate .tlog files.

  • Pretty spiffy! Thanks!

  • Weiliang, I sent you an email. I now realized that it's not an original .bin log, but a .log file that MP converted.

  • Rostislav Kolotov  if I am not wrong, your logs are old and hence do not have GPS week, therefore the system will take upload time. Since all are uploaded at the same time, they will carry the same date. Do you mind sending me the log file hello@exmaps.com.

    Martin  yes that is really weird. Did you open the log in excel and saved it again? If possible send me the log as well? Btw, Max filesize has been increased to 150MB.  

  • I uploaded an ArduPlane log yesterday I encountered the following issues:

    • 100 MB file size limit - many of my dataflash logs are much bigger,
    • numerical labels for flight modes,
    • something is terribly wrong with the power usage stats.

    3701870310?profile=original

  • Weiliang I think I know why that happened: FLIGHT DATE is at UTC time, that is why it shows same date,

    Would be logical if it was in local time instead of UTC, to illiminate any confusion.

    But run into diff problem, I uploade tlog succesfully but when I tryed loading log files it gives me error mesage (processing failed)

  • Rostislav Kolotov please send the logs to hello@exmaps.com so that we can take a look. Appreciate your help. We have never encountered that error in our internal tests. 

  • Weiliang looks great. I like simplisity of controls and have all flights in one place and summarized.

    When I uploaded bunch of logs it shows the same date for some of them, when in fact they were done on separate dates.

    Battery info is accurate as I can see.

  • 100KM
    Thanks very much for the upgrade appears very smooth now.

    In the spirit of constructive feedback there are two things I feel could be really useful to myself and others.
    1) Would be to give an option/extra column for flight time on the main log list instead of just total time - I notice it calculates total flight time at the top fine though which is great.
    2) Another great addition would be a free text field for user notes on the flight. This would be handy for future reference as I can see myself listing motor/prop combinations and parameter info as I'm testing different configurations. Combined with the great new battery monitoring this could be a really powerful tuning aid.

    Thanks again - awesome service!
    now.in
  • @Franc, yeap we discussed that possibility. Better would be to turn on and off lines according to modes. That way we can minimise "spaghetti" on map. 

    @Oscar, flight uploads are already sorted by calender date, with latest one on top. Is there something I am missing here? 

    Hows the battery data turning out for you guys? I happen to chance upon a russian flight which was uploaded to public. Amazing. 2hrs 5 mins flight time 106km 3+A average drawn. I wished more people can share such flights. 

    Some of you are not able to upload flight logs. We are investigating the issue now. 

This reply was deleted.