Gender
Male
About
Location
Sakhalin
Please tell us a bit about your UAV interest
Just a hobby, fixed wing
Hometown:
Yuzhno-sakhalinsk
Activity Feed
"Alexey,
This is a one piece of long antenna!!!!
Could you share transponder setup and spec.
Way to go.!!!!"
This is a one piece of long antenna!!!!
Could you share transponder setup and spec.
Way to go.!!!!"
"Alexey,
This is a one piece of long antenna!!!!
Could you share transponder setup and spec.
Way to go.!!!!"
This is a one piece of long antenna!!!!
Could you share transponder setup and spec.
Way to go.!!!!"
"You might have airspeed bellow min setting ,then TEC limits climb angle to maintain speed"
"Weiliang I think I know why that happened: FLIGHT DATE is at UTC time, that is why it shows same date,
Would be logical if it was in local time instead of UTC, to illiminate any confusion.
But run into diff problem, I uploade tlog succesfully but…"
Would be logical if it was in local time instead of UTC, to illiminate any confusion.
But run into diff problem, I uploade tlog succesfully but…"
"Weiliang looks great. I like simplisity of controls and have all flights in one place and summarized.
When I uploaded bunch of logs it shows the same date for some of them, when in fact they were done on separate dates.
Battery info is accurate as I…"
When I uploaded bunch of logs it shows the same date for some of them, when in fact they were done on separate dates.
Battery info is accurate as I…"
"People mount cameras on vertical surface on planes tail. It gives very different view to the flight . You can easy find examples on YouTube."
"Taylor,
I already installed your software, registered an account but can't get to work.
"sweep video " button is not active. Am I missing something????"
I already installed your software, registered an account but can't get to work.
"sweep video " button is not active. Am I missing something????"
"Andrew,
Installed beta , it connection is fine now with both params set AUTO (2). Is there any more changes I need to know in it? I'd like to stick with it."
Installed beta , it connection is fine now with both params set AUTO (2). Is there any more changes I need to know in it? I'd like to stick with it."
"Connection issue solved. Set both parameters to 0, then it started working.They were set at 2.
I guess defolt value changed in this FW , and never paid attantion as it was working fine before.
Thank you."
I guess defolt value changed in this FW , and never paid attantion as it was working fine before.
Thank you."
"Both units have solid green light , so they see each other. when I try to connect red light blinking green stays on.
I did not change or checked BRD_SER1_RTSCTS and BRD_SER2_RTSCTS, it was working fine just today on 3.0.2 I will check them shortly…"
I did not change or checked BRD_SER1_RTSCTS and BRD_SER2_RTSCTS, it was working fine just today on 3.0.2 I will check them shortly…"
"Andrew,
Since I upgraded to 3.0.3 I can't connect to PH via telemetry.
I',m using RFD900 modems , havent had anyissues connecting to the board on 2.78, 3.00,.3.01, 3.0.2 FWs.
Downgraded to 2.78 and it's working again . Pins for flow conrol are not…"
Since I upgraded to 3.0.3 I can't connect to PH via telemetry.
I',m using RFD900 modems , havent had anyissues connecting to the board on 2.78, 3.00,.3.01, 3.0.2 FWs.
Downgraded to 2.78 and it's working again . Pins for flow conrol are not…"
"Trent,
I had stable connection 30k away at 150m heght with this baby,
was able to read and wright. I bellieve you can get telemetry ~50k using directional antena on one of them!!"
I had stable connection 30k away at 150m heght with this baby,
was able to read and wright. I bellieve you can get telemetry ~50k using directional antena on one of them!!"
"I took out my old APM 2.0 board with FW 2.64 loaded to test it , guess what joystik works perfectly.
Loaded it with newest version of Aplane 2.78 and it works again.
Looks like samething was wrong with my APM 2.5 board!!! Cant test it as I had fly…"
Loaded it with newest version of Aplane 2.78 and it works again.
Looks like samething was wrong with my APM 2.5 board!!! Cant test it as I had fly…"
"I have exact problem with joystick , just mine was working before apdate to latest FW.
Were you able to solve it!!!!!!"
Were you able to solve it!!!!!!"
"Looking forward to see first flight reports . Wing loading looks abit high so would be very fastflying.
Also remove Landing gear for hand launching should work good. Hope it flyes as it looks. HK is doing prety good job on brinning this FPV drone…"
Also remove Landing gear for hand launching should work good. Hope it flyes as it looks. HK is doing prety good job on brinning this FPV drone…"
