Congratulations to all at ALTIUAS an RPA made in Africa, for Africa and the rest of the world. This would meet the delivery drone targets of many emerging projects. Instead of delivering things swap out the payload for cameras and be able to survey…
"I have honestly not looked at connecting this 2 axis gimbal to the Pixhawk yet, just haven't gotten around to it and been flying the system as it came out of the box as much as possible. So I haven't looked at whether it can be connected to Pixhawk…"
"Hi Weiliang
Ok, so after some further testing:
I have always been downloading log via CLI in Mission Planner over USB cable from Pixhawk and thus only ever ended up with .log files and no .bin files. Since updating the Pixhawk firmware to 3.2 I have…"
Thanks for the quick feedback. As you can see from the attached screenshot CURR is enabled for all my .logs. Most of my logs were flown with AC3.1.5 and this particular one with AC3.2 (no CLI in 3.2) but both had CURR enabled.
"Hi Francis, yes the pitch of the camera is fixed (45degrees in this video), the gopro is on a 2 axis stabilized (pitch and roll) brushless gimbal attached to the front of the quad (the front arms are set wider apart and the camera is mounted in…"
"Very well done Weiliang! Polished interface and love the batch uploading feature.
Any chance of displaying battery mAh data from .log files? This is due to not always flying with a GCS connected to generate .tlog files."
I picked up my board from Fedex today. Thanks :) but unfortunately after having followed the below instructions from the wiki I am still unable to get my Windows 7 64bit to recognize the FTDI bit on the board. I tried 3 different…"