Nano Hyperespectral sensor now supported for Aeromapper 300

Aeromao Inc, has delivered an Aeromapper 300 customized and ready for the Nano-Hyperespectral camera from Headwell Photonics to the University of Brasilia, in Brazil.

Since the initial approval was granted the custom integration was performed in a record time of only a few weeks.

When it comes to find a UA­­­V dependable enough to trust such an expensive sensor, the Aeromappers are the obvious choice thanks to its affordability, dependability, ease of use, parachute recovery and great level of support. 

The Nano hyperespec camera is fully enclosed into the payload bay, meaning that the sensor is very well protected by the carbon fiber/Kevlar pod of the aircraft. A quick swappable mount is provided so the aircraft can be also used normally with other sensors such as the RGB 24 Mp camera included.

 

The Headwall’s Nano-Hyperspec® sensor is a completely integrated hyperspectral camera designed for the VNIR (400-1000nm) spectral range, with interchangeable lens capability. A key advantage of the Nano-Hyperspec is that it also includes 480GB of on-board data collection/storage, plus attached GPS/IMU functionality.

 

Basic Specifications:

  • Spatial bands: 640
  • Spectral bands: 270
  • Frame rate: 350 Hz (maximum)
  • Dispersion per pixel (nm/pixel): 2.2
  • Lens options: 17mm, 4.8mm, 8mm, 12mm
  • Storage: 480 GB
  • Interface: Gigabit ethernet
  • Weight: 520 grs (excluding lens)

 

For more information on the Aeromapper 300 go http://www.aeromao.com/

For more information on the Nano-Hyperespec go here

 

The Nano hyperspectral imagery can be used for  blah blah (from video)

 

If you want to learn more about how Hyperespectral imagery can benefit your business, we recommend to watch this 5 minutes video:

https://www.youtube.com/watch?v=xwT1fPJJt9Q

 

Aeromao Inc. is a Canadian leading UAV manufacturer since 2011, developer of the Aeromapper series of turnkey unmanned aerial vehicles for mapping, surveying, precision agriculture and remote sensing.

With exports to more than 45 countries in less than 4 years after founding, Aeromao Inc. offers a line of products that adapt very quickly to market demands and to unique client’s applications, where no other UAV manufacturer goes. From wildlife monitoring in the Artic to water quality monitoring in Saskatchewan, to urban mapping in Thailand, the Aeromappers are currently being used by private companies, research organizations, universities and government agencies all over the globe for a wide variety of applications.

For more information on the Aeromappers please visit: http://www.aeromao.com/products/

Views: 878

Comment by Thiago Silva on January 25, 2018 at 1:18pm

Hard mounted or gimbaled? Using the XSens INS or a higher precision system? I'm currently having integration  problems with a similar camera, and trying learn from other people's experiences.

Comment by rochobby airplane on April 10, 2018 at 8:48pm

hello, can i install the camera on my RC Jet RC airplane

i have a freewing Jet Rc airplane

Comment

You need to be a member of DIY Drones to add comments!

Join DIY Drones

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2018   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service