New wing from Skywalker factory >>X8 UAV platform<<
For those who want Long range / Long flying time / High payload the new X8 wing will get you there..
The wing X8, will be released early 2012.
Wing span: 2122mm
Wing area: 80dm2
valid payload: 1000-2000g
X8 use KV730 2820 Motor, 40-60A ESC and 1260, 1280 prop
I'm already in love with this bird...
Comments
http://www.rcdude.com/servlet/the-Brushless-Motors-cln-Scorpion-30m... I went with 3020 890 kv on 4s with 12 6 just a higher kv on 3s this guy has great serv shiped mine the same day
So I am trying to gather the equipment needed for my X8 and wanted to find out what the recommended Motor, ESC, and Prop would be for a 3S setup???
Thanks!
I covered mine with corbon vinyl:
Now I'm busy fitting it all in APM1 and FPV.
sir Hooks,
how much would be the shipping to philippines?? i just checked the site on you post you have the white on stock already
X8 EPO wing now in stock and ready for sale.
Black version will be made later this summer
Hi Peter!
How are you?
I am interested in the X8 for AP.
Some questions... ;)
Did you already test it with the Hacker motor?
How long do you think you can fly with 2 x 4s 5000mAh at aprox. 30 mph???
Can it carry 15000 mAh without any problem?
Thanks for your help!
@peter
thanks for the info and I am looking forward to see the videos of your new experiments with this airframe. It would be helpful if you could include the motor/esc/prop/battery specs and resulted characteristics, e.g., net weight, flight time, max speed, at the beginning of the videos or their descriptions.
@peter Have you changed anything since your long endurane flight: https://www.youtube.com/watch?v=4LFb8-n0M0o&list=UUMFmCadWjOasgR...
I'm not 100% sure I understand your point. Of cause thread like this Can and Will be posted ón diydrones. A platform like X8 is like a component for making a diy drone.
-
2
-
3
-
4
-
5
-
6
of 12 Next