Update - Most items sold. Closing this listing.Hello. I am in the process of moving and am trying to parse down my inventory of supplies. I have the following items below all new and never used. Please let me know if interested in anything or…
Good evening out there all X8ers. I had bought an X8 from BevRC back in 2012 and have never got around to setting it up or doing anything with it. I'm in the process of getting ready to move across the country right now and I have a brand new X8…
Good morning to all those x8ers out there. I've had my X8 for a few months now and it is unfortunately still in the box. I still need to order the motor, prop, and possibly batteries for it. What are thosse out there who have it flying using for…
"So I am trying to gather the equipment needed for my X8 and wanted to find out what the recommended Motor, ESC, and Prop would be for a 3S setup???Thanks!"
HAs anyone had issues with the airspeed sensor using ArduPilot with the shield? I have set the proper millivolts in the code but it doesn't seem to work right. After loading the code and looking at the GCS at a standstill the airspeed is…
I've obtained the proper millivolts from my regulator and GCS is reporting a full battery (even when plugging in a drained one). When I connect everything up my battery always reports full regardless of it's real value. I tried adding a divisor of…
"I have a Futaba 72mhz radio as well and am experiencing similiar issues. All will be fine then sudden twitching of the servos. May have to try a 2.4 to see if this solves the problem."
I have an EasyStar with ArduPilot and ArduIMU. I've tried multiple configurations of the hardware in the EasyStar and cannot find a suitable location for everything. How does everybody have their equipment setup in the EasyStar including the…
"I to am interesed in seeing if this can be corrected, specifically the altitude. I realize that the altitude being reported is current location meters above sea level but it would be nice for this to report meters above home position and also have…"
"As far as the altitude is concerned is this displayed in meters? Along the same line, when i plug in my ArduPilot and I start receiving telemetry the GCS displays an altitude even though my airplane is on the ground. Is this elevation above sea…"
Simple question....Can you use the ArduIMU and the MediaTek GPS receiver together? When I go to upload the IMU code there is no option for the MediaTek receiver.