Discussion group for ArduCopter users
Drone flying to non visible point
Hi there,I encountered a problem, while flying in auto mode, with approching to point that was not set by trajectory and is not visible after downloading mission from flight controller by Mission Planner. Does anybody encountered similar problem. The situation is that in the middle flight I stopped the UAV and uploaded new mission and after changing to auto mode it starts to fly in some direction. It goes straight to some point, so I assume it's not mechanical problem. I attached the link to…
Read more…
Comments
Some help please! I have been trying to get two cannons to fire simultaneously while being stabilized by two servo driven gimbals running off pins RC10 and RC11.
When using 10 or 11 to trigger the cameras works those seem to be the only pins that drive the servos. I have tried multiple times to get RC8,7, just about everything I can
think of but I seem to be missing something. I am using channel
7 as my manual camera trigger and have set the servo out function of RC8 to "camera trigger" I am really at a loss. If anyone could point me in the right direction I would sure appreciate it.
I have another basic question:
What is the significant difference between professional autopilot systems and opensource units. IS it really worth the extra money or will opensource units be able to provide the same functionality such as blackbox, phone or tablet comms or even joystick from ground station control?
@Andre Schoonbee : I think this is a great idea :)
I am sure, such a mode like "Point of No return" will give more versatility to Arducopter code base and probably, save some folks their copters!
I have an idea/request
I believe it will be of great help if we could have a mode like "Point of No Return". The idea is that the autopilot needs to monitor the battery usage as well as the distance from home and work out the consumption of power. Then given the amount of battery power still left it should initiate return to home. This will prevent loss of the unit. TI have this as a mode will give the user the ability to select this if they are flying over difficult terrain or over water.
Hi, I am trying to pair 2 air modules of an old 3dr radios, does anyone know how to accomplish this?
@Longshot7601,
The PM Eagle files are on this webpage:PM
Regards,
TCIII Admin
Does anybody have a link to the Power Module schematic? Mine isn't working and I want to know why.
Thanks in advance.
@dr0n3droid My problems started here: http://tinyurl.com/pj3yp3g
Now I think that I should have kept those clones and just transplant the voltage regulator from the old (original) PM to the new clone. Now I have none. I've sent the clones back and have refunded.
You just can't know if it's genuine or fake until it's in our hands, cuz those stores for sure don't say it's not the real thing. And the shipping costs for tiny things, gosh!
I think I'll stay here for today!
Thanks again dr0n3droid!
I keep that CC BEC around for situations like this. There is no I&V monitor, but but I can still fly.
I busted another PM yesterday in a rover crash. That's two now. If I break 3 more it might be worthwhile to fix them. I found the part I need.
http://www.digikey.com/product-detail/en/PTH08080WAH/296-20432-ND/7...
$6.77 seems reasonable, but $48 for shipping? Something is wrong with the system.