Discussion group for ArduCopter users

3182 Members
Join Us!

You need to be a member of diydrones to add comments!

Join diydrones

Comments are closed.

Comments

  • Hi , we want design flight controller with arduino through model based design for a quad rotor , what sort of quadcopter is suitable for this aim ? a provided one or assembling separate parts ?

  • I have Mission Planner 1.3.3.1 and Arducopter V 3.2.1, but so far I could not open nor play any log, What I have to do to display the logs or play them?

    I click in the download log and play log button in the Planner without any result

    Thank you

    Juan

  • I think Richard's solution is better :)

  • Just created a mod for apm planner 2.0 that allows you to trigger flight modes using keystrokes. I'm working on another mod that will allow me to use a midi foot pedal board to trigger flight modes and expression pedals for rate/gain tuning.

    If anyone is interested and would like to take advantage of key commands for flight modes, just reply here and I'll forward you the details.

  • LOL good one Cala!! 

  • I suggest a better solution ;)  

    3702036277?profile=original

    (....sorry the offtopic, I'm tempted)

  • 3702035938?profile=original

  • Dax

    I have both set to 500 already. So I don't know what else to try. 

  • In stab mode if I go full throttle it takes off straight up very fast as you would expect. In alt hold or pos hold however it goes up but much much slower. Anybody know what I need to turn up to increase throttle authority? Thx

  • @DG Yes I have a Taranis! Like the way it hooks on the lip of the antenna base great design.  Perfect man thanks!!!!

This reply was deleted.

Drone flying to non visible point

Hi there,I encountered a problem, while flying in auto mode, with approching to point that was not set by trajectory and is not visible after downloading mission from flight controller by Mission Planner. Does anybody encountered similar problem. The situation is that in the middle flight I stopped the UAV and uploaded new mission and after changing to auto mode it starts to fly in some direction. It goes straight to some point, so I assume it's not mechanical problem. I attached the link to…

Read more…
0 Replies

TAKEOFF WITHOUT USING GPS

Hi,Im working on a autonomous drones and im using JETSON NANO and flight controller PIXHAWK .Im able to control my drone by giving rc commands on the MAVLINK terminal itself by connecting it with PIXHAWK but now i want a python code from which i can do some operations like:takeoff,left ,right,forward,backward…and i am not using GPS…Can anyone please help me…

Read more…
1 Reply · Reply by tellinglean Oct 17, 2022

HELP quadcopter: one motor twitching and stuttering

Hello guys,I have a problem with one motor, do not spin and making a sound (videos in attachment), I changed the motor to another ESC and is work, so I checked the connections on ESC and all connections looking great. any ideas or something I can do, iam trying to build YMFC32 Brokking .thank youhttps://youtu.be/LagBqwGbixkhttps://youtu.be/PU20nCxApcs

Read more…
0 Replies

Will AHRS_ORIENTATION=8 for Arducopter 3.2.1 on APM 2.5 using a traditional Heli

I have been Reading Chris Olsen posts and watching his videos on Arducopter with traditional Helis using a Pixhawk.I have inherited an older Trex 450 heli with the old Align 3G FBL hardware.  The FBL controller appears to be bad.  So I have an old APM 2.5 without a compass or GPS on board.  I just want to replace the failed Align 3G FBL system with the APM.Now I have to mount the APM under the skids on the heli so the APM will be upside down.I have Two questions.1)  Is the AHRS_ORIENTATION=8…

Read more…
0 Replies