Gender
Male
About
Location
Springfield, MO
About Me:
Background mainly in film production. I've been building and flying multirotors for a couple of years. I've recently taken on the job of collecting ndvi imagery of crops for a local precision agricultural company.
Please tell us a bit about your UAV interest
Aerial Filming, crop stress imaging, mapping
Hometown:
Washington, MO
Activity Feed
This X8+ was briefly used as a mapping platform and has flown only a handful of missions. Like new condition. Extra props are included but no ground station radio. Originally paid over $1700. Asking for $1300 obo. Buyer pays shipping…
"Can anyone share their starting PID values for the E800 kit with an extended Tarot 680pro? "
"According to the Air 40A ESC manual, those other two aren't receiving a output signal from the throttle channel from the receiver. So it might actually be a ESC calibration issue. I don't have much experience with Futaba products so I don't know if…"
"hmmm...thats pretty interesting. Maybe you could flash your pixhawk with the latest stable version of arducopter and start from scratch. I would also check the continuity of each of your solder joints. Also check your RC_3 MIN and MAX PWM values…"
"They should work fine together. I use the Tmotor Air 40A ESC with Tmotor 580kv motors and a Pixhawk FC. I used the all-at-once ESC calibration method listed on the Ardupilot wiki page. http://copter.ardupilot.com/wiki/initial-setup/esc-motor/
I…"
I…"
"I currently use a GentWire Focus cable to trigger my Sony A5100 using MP. You have to configure the camera trigger option to a "servo" and set the pwm value to 1800 or so. You have to mess around with the PWM values to get the camera to trigger…"
"More
Quote:
Originally Posted by Jason Short
Props are 10 x 4.5
Quote:
The Pixhawk 2 is a refined version of pixhawk1, the dual processor flight controller we have today. But it has internal damping and 3 IMU's which are used to for…"
Quote:
Originally Posted by Jason Short
Props are 10 x 4.5
Quote:
The Pixhawk 2 is a refined version of pixhawk1, the dual processor flight controller we have today. But it has internal damping and 3 IMU's which are used to for…"
"sourced from a thread on RC Groups
Ok, Jason Short is on the Solo FB page answering a lot of questions. He's an actual 3DR employee.
Quote:
Production units have 2DBi omni directional diversity antennas. We opted for that to give users the ability…"
Ok, Jason Short is on the Solo FB page answering a lot of questions. He's an actual 3DR employee.
Quote:
Production units have 2DBi omni directional diversity antennas. We opted for that to give users the ability…"
