Gender
Male
About
Location
Bogota
About Me:
Industrial designer with +7 years of developing mobile apps.
Please tell us a bit about your UAV interest
Aerial surveing
Hometown:
Bogota
Activity Feed
"Hi Joel,
Attached is the mount plate for the gimbal.gimbal_mount_plate.eps"
Attached is the mount plate for the gimbal.gimbal_mount_plate.eps"
"Hi Bob,
I crashed my 3DR X8 (2013 with APM 2.6) and destroyed almost all the electronics and motors. The original configuration with one 5000mah 4S with GoPro+Tarot 2D and video transmitter never flew more than 8 minutes.
I would like to rebuild it…"
I crashed my 3DR X8 (2013 with APM 2.6) and destroyed almost all the electronics and motors. The original configuration with one 5000mah 4S with GoPro+Tarot 2D and video transmitter never flew more than 8 minutes.
I would like to rebuild it…"
"Hi Jaco,
What area and time in a mapping mission can your iris+ flight with the canon sx260 and the original battery? I am using a 3dr X8 (apm 2.6) canon sx260 and 5000ma 4c battery, at 100 m altitude and 6m/s it covers 800m distance, about 2ha. I…"
What area and time in a mapping mission can your iris+ flight with the canon sx260 and the original battery? I am using a 3dr X8 (apm 2.6) canon sx260 and 5000ma 4c battery, at 100 m altitude and 6m/s it covers 800m distance, about 2ha. I…"
"Hi Pascal,
I am using a 3dr x8 (2013, APM2.6), Canon 260sx and 5000 ma 4c battery for mapping. My missions usually are at 100m altitude and 6m/s, and the máximum distance that it can cover before going to failsafe is 800m, that is about 2ha per…"
I am using a 3dr x8 (2013, APM2.6), Canon 260sx and 5000 ma 4c battery for mapping. My missions usually are at 100m altitude and 6m/s, and the máximum distance that it can cover before going to failsafe is 800m, that is about 2ha per…"
"Hola Xavier,
Estaba usando un 3DR X8 con una Canon SX260 para fotogrametría, pero hace unos dias lo estrellé... perdida total. Estoy pensando usar un IRIS, y tu gimbal me parece una buena opcion. Por favor dime cuanto cuesta el gimbal, y cuanto…"
Estaba usando un 3DR X8 con una Canon SX260 para fotogrametría, pero hace unos dias lo estrellé... perdida total. Estoy pensando usar un IRIS, y tu gimbal me parece una buena opcion. Por favor dime cuanto cuesta el gimbal, y cuanto…"
"Hi Iskess
How should I list the logs? what meas 'CLI' ?
There is no CAM messages in my logs, my camera is connected to the APM and it seems to shoot at the right spots. "
How should I list the logs? what meas 'CLI' ?
There is no CAM messages in my logs, my camera is connected to the APM and it seems to shoot at the right spots. "
"Sorry for replying so late.
For sure I'll cut it and send it you.
I'm Colombia (south america) and the shipping is ridiculous expensive ($70 shipping to USA !!!).
But my brother in law will be in Orlando FL in april 21st, so he could ship the…"
For sure I'll cut it and send it you.
I'm Colombia (south america) and the shipping is ridiculous expensive ($70 shipping to USA !!!).
But my brother in law will be in Orlando FL in april 21st, so he could ship the…"
"I cut it with laser in poliestiren board. I can email you the .eps drawing file if you want."
"Tarot gimbal on 3DR X8 (2013).
I made a mounting plate for the Tarot gimbal V2, the space between the top and bottom plates of the X8 is good enough to fit it in there. Works fine so far."
I made a mounting plate for the Tarot gimbal V2, the space between the top and bottom plates of the X8 is good enough to fit it in there. Works fine so far."
"Now it is working, I swap GEAR and AUX1 cables on the AR8000 receiver and I got six flight modes on the Flap switch.
I'm using the knob on AUX2 to control the camera tilt, and I would like to use AUX1 for the sonar, but in the APM I can not make it…"
I'm using the knob on AUX2 to control the camera tilt, and I would like to use AUX1 for the sonar, but in the APM I can not make it…"
"Hi MBerry,
I'm trying to get 6 flight modes from my APM 2.6 using Spektrum DX7s. I've followed the instructions setting up the DX7s, but there is no change in the PWM output in Mission Planner.
I am getting only 3 modes on the Flap switch.
Attached…"
I'm trying to get 6 flight modes from my APM 2.6 using Spektrum DX7s. I've followed the instructions setting up the DX7s, but there is no change in the PWM output in Mission Planner.
I am getting only 3 modes on the Flap switch.
Attached…"
"I'm trying to get 6 flight modes from my APM 2.6 using Spektrum DX7s. I've followed the instructions setting up the DX7s, but there is no change in the PWM output in Mission Planner.
I am getting only 3 modes on the Flap switch.
Attached is an…"
I am getting only 3 modes on the Flap switch.
Attached is an…"
"I'm glad you solve the problem. Please let me know your experience with the ASP 2-Axis."
"Hola Christian,
Me gustaria ir a verlo volar, dime donde vas a estar y a que horas y nos vemos.
Ivan C. 311 569 5221"
Me gustaria ir a verlo volar, dime donde vas a estar y a que horas y nos vemos.
Ivan C. 311 569 5221"
"Jamie, I'm about to get a 3DR X8 with the ASP 2-Axis. I will appreciate any advice you can give me about the batteries and the Gimbal. I'm planning to use a Canon SX280 or a NEX."
"I'm planning to use a 3DR 8X for aerial photogrammetry. I would like to use a Canon SX280 or Sony NEX, does anyone know what gimbal could I use with the 8X ?"
