Hi DIY DRONES friends,
Because of the "man on the moon" 50TH anniversary I would like to share with you the 3d printed moon project. It is a 22 GB digital model from Nasa LRO data that can be any size 3d printed.
I CAN HELP YOU IF YOU WANT TO START 3D PRINTING &
YOU CAN HELP BECOMING KICKSTARTER MOON BACKER
THANK YOU FRIENDS
https://www.youtube.com/watch?v=u6r0m5KM4m8
In the Albatros UAV, a new design after Barcelona 3d printed UAV, I'll test a moving mass (batteries) control and an aeroelastic wing for the aileron surface. What do you think about that?
Here you can see an interesting Al union for CFRP or composites joints. Al+CFRP glue. A-Al heat by solenoid.
https://www.youtube.com/watch?v=zwvQuhjKeUo
130h 3D printing process has finished. Take a look at FORTUS400mc UAV apps performance!
COMHER, STRATASYS International distribution, is printing Barcelona 3D printed UAV.
FORTUS 400mc is able to print this 15dm wingspan and 10dm fuse length in only 8 parts in the same print volume.
Material ABS30
Duration: 130h
See the printer in action:
This weekend STL files of Barcelona 3D printed UAV will be uploaded for all of you!
I have been upgrading vertical tail in order to increase control power factor and preparing some information for the slicer process and assembly.
Sorry for the delay.
Brief explanation of this UAV with English subtitles, PRESS CAPTION:
Hi UAVers!
I would like to show you the new Barcelona 100% 3D printed UAV.
https://www.youtube.com/watch?v=Ew334q5Dan0
https://www.youtube.com/watch?v=3mbl7IXBJHQ
Basic Features:
1500mm wingspan
1000mm fuselage length
845g operational weight
I think it is the first one in Spain, the second one in Europe and the fifth in the world (after SULSA, AMRC, WENDY & VAST) Is there any list of 3D 100% 3D printed UAV's?
I have 3d printed a wing part has been flight tested with a MULTIPLEX fuselage (above)
Now I am in a fuselage designing process and I am not sure in the printer axis parts since airstream aligned to Z printer axis layers.
Could somebody help me?
Thank you
