"If you use Reach's internal wifi only I guess that the range should be really small because it does not have external antennas and the transmission power is probably very low. That is why we use a Wifi router with higher transmission power and a…"

"The range depends on many factors:
I have an Alfa Network Router, which has 500mW of Transmission power and an omni-directional antenna (supposedly 12dB although I guess it has much less, the stock antenna was 5dB). With this set-up I have been able…"

"I use it for vehicle positioning. In fact, I obtain the position of the drone in real-time for a software application that makes calculations with that positioning. It is not a matter of range when using telemetry radios, because those dropouts are…"

"I bought an EMLID Reach Kit. Here is my experience so far.

Integration with Pixhawk is good. It does require some configuration and understanding how the system and differential positioning works. It took me a lot of reading through the forum and…"

"I bought an EMLID Reach Kit. Here is my experience so far.

Integration with Pixhawk is good. It does require some configuration and understanding how the system and differential positioning works. It took me a lot of reading through the forum and…"

"I am looking at exactly the same configuration, as I am using Pixhawk as FC. Adding LB as a standalone module for transmitting video. Can I just plug the HDMI from the camera, power the LB air module with a 3-6S battery and receive the video on the…"

"I have the same question, because i am now using dgps. I recently purchased a Reach Kit from Emlid and was able to do some ground tests and get RTK fix (I measured centimeter level accuracy for horizontal positioning, I expect vertical accuracy to…"