Gender
Male
About
Location
Tel Aviv
Please tell us a bit about your UAV interest
Quad
Hometown:
Tel Aviv
Activity Feed
"Hi Bill,
Thanks for your prompt reply.
I managed to solve the issue by using mavlink.Messages.pixhawk package instead of org.mavlink.messages.
Everything is working now.
Cheers,
Oren"
Thanks for your prompt reply.
I managed to solve the issue by using mavlink.Messages.pixhawk package instead of org.mavlink.messages.
Everything is working now.
Cheers,
Oren"
Hi,I wrote a java program to the Pixhawk via Mavlink. As part of the connection i send heartbit every sec and ask for MAV_DATA_STREAM_ALL.The problem is that I receive only heartbit messages.When i try to connect to APM i do get all Mavlink…
Hi,I use pixhawk and would like to control a 3d gimbal by pointing the gimbal to a specific yaw angle for example 30 degree from the drone nose.Does anyone knows a gimbal that supports it?Thanks,Oren
"The problem happened when I used 4S battery. I switched to 3S using the same prop size and the quad fly well
Hope it helps"
Hope it helps"
Hi,I just finished building my first quad using APM 2.6.I did all the calibration process and when I planned to do the test flight and gave some throttle I noticed that motor #4 spins slower than the others. I checked if it’s the motor or the ESC…
"Yes I did, I calibrated the: radio and ESC (they worked well when calibrated the compassmot)"
Hi,It’s the first quad I built using APM 2.6. I completed all the setup procedure and when I tried to do the test flight and raised the throttle the motor started to work but very slowly (like 10% from the max power).Any idea what can cause it?Thanks
