Replies

  • Hey Brit

    Can i ask how you did this? I am currently trying the same thing but with the mission control as node 0 and two drones as 1 and 2.

    cheers
    Adam
    • Hi Adam,

      I'm happy to share my setup, but I don't understand why you'd want two drones to be simultaneously connected to your GS. I'm not sure my setup would help you if this is your goal. Can you elaborate?

  • Any luck with this Brit?

    • Yes, I have it working 100%. A three-node network with node 0 being the aircraft, 1 and 2 are my telemetry and laptop. Pretty convenient...and I'd almost forgotten about it!

      • Hi,

        So you are using the 2.x on a HM-TPR module based radio?

        Could you please make a mini how-to, or send the firmware file?

        Does 2.x firmware need bootloader update on HM-TRP modules with 1.9 SiK currently installed?

        I'd like to set plane or copter to 0, ground station and antenna tracker to 1 and 2.

        Thanks in advance!

        Adrian

        • Hello Adrian,

          Yes, it works just fine. It has been a long time since I set it up so I can't really do a mini-how to, but you can find the documentation on it. You will need to set AT registers manually to get it working, but it's not that hard once you read about it.

          See the FW link at the bottom of this page.

  • no - and why would you do something like that ?

This reply was deleted.

Activity

Mike Whitney liked Mike Whitney's profile
Jul 19
Abdulatif Tlaib liked Ryan's profile
Jun 24
More…