Hi there,
More updates regarding this problem (it starts to piss me off!):
I use ArduIMU, Ardupilot and Ardushield V2.
I use the latest Ardupilot software version and ArduIMU software version 1.8.1
I get solid blue light on LED on ArduIMU but Ardupilot blue LED is still blinking...
I get full manual control but no STABILIZATION. Somehow it seems Ardupilot doesn't get the GPS lock from the ArduIMU...
I checked the settings in software and I have the right settings for the Ardupilot code (I told it to expect ArduIMU input) and I also told ArduIMU to expect GPS EM-406A...
I checked connections and they are per manual!
What else to check?
Best regards
You need to be a member of diydrones to add comments!
Replies
hello there
first i have self the EM-406 and works only for RTL
then i changed to original MTK GPS and it lucks like i we have now the same problem -no stbilization and no servo out
http://diydrones.com/forum/topics/ardupilot-is-scrap
i try and try since weekd and month with this shit Firmware and hardware and i am short before to use a huge hammer to
show the Arupilot some heavy impacts