Mapping plane frame

Replies

Developer

John Arne Birkeland April 29, 2016 at 4:23pm

And then there is the ugly duckling..

http://www.hobbyking.com/hobbyking/store/__58045__Skua_FPV_Plane_EP...
Gabor H April 29, 2016 at 5:34am

Don't forget about check this one, too.
Pretty big inside, Sony A5000 can fit. Myself going to choose this one soon.

http://flyingwings.co.uk/new-products/venturi-fpv-wing.html
Alasdair April 28, 2016 at 10:42pm

The MTD from My Fly Dream has to be the ultimate stable platform out there, it has low wing loading, decent length tail boom, carbon reinforced wings and tail, huge cavernous interior allowing 3 hours worth of batteries and any array of electronics imaginable, twin (counter rotating) motors offering better reliability (as seen on YT, after a prop explosion, pilot was unaware until landing), it has very accurate epo moulding and includes proper servo holders and plastic capped interconnects, literally a stage area for cameras and gimbal. All in all, a very well engineered and proportioned plane, frequently flying 100km+ missions, it is hardly affected by wind, has very low cruise power requirements with plenty of reserve for headwinds or ROC, flies comfortably between 45-60km/h. Has removable outer wings and tail for transportation, it is fairly cheap, and looks good Worth a look at least...

https://www.youtube.com/watch?v=sW8dfq7yuBQ

https://www.youtube.com/watch?v=U4_lE4VyWtc
- IronDOME > Alasdair June 22, 2016 at 5:05pm
  
  HI Alasdair
  
  Any ideas to have wing extensions removable? They make it really bulky.
  
  Thanks ID
Christiaan van Vollenstee April 28, 2016 at 9:15am

Pop me an email (cvanvollenstee@cfaktor.com), I sell the Talon for $120 and the extension wings $25.

Please note we do not sell the extension wings separate from the Talon because of shipping logistics of the extended spars.
Rob Dunbar April 27, 2016 at 6:16pm

Just thought I would show a picture of what I did to my 2015 Skywalker 1830. I'm placing a Sony QX1 in the fuselage. Without cutting the plywood I had to make a huge whole. The good part is the camera is well protected.
- Jim Pullen > Rob Dunbar April 28, 2016 at 11:30pm
  
  Rob,
  
  Could I ask how you trigger the Sony QX1?
  
  Thanks.
  - Jim Pullen > Jim Pullen May 1, 2016 at 8:39am
    
    Rob,
    
    Superb, thanks very much.
    - Rob Dunbar > Jim Pullen May 2, 2016 at 6:50pm
      
      JIm, Thanks for the link on the cheaper source.
    - Wahono > Jim Pullen May 2, 2016 at 3:27pm
      
      You may get the stuff Rob Dunbar suggested from Aliexpress, at lower price + free shipping. Look at this.

of 5

Discussions

Mapping plane frame

Replies

Activity