Sky walker X8 high wind stability problem

I have twe sky walker platforms both with different setups.the problem is in above 14 mph winds then spiral in while doing quite tight turns which they refuse to recover ..even the ardupilot cannot cope .. Should I move to the skyHunter instead Anyone have any ideas please .. Gina

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • more or less deltawings are more sensitive to winds and more difficult to fly.

    i think that apm or pixhawk cannot easy handle stalls, although they have STALL_PREVENTION.

  • Shifting the CG has helped a little.However it appears to have shifted the spiral problem to another slower wind speed .How odd is that .I do think the winglets are good but not perfect.How I wish I has a skyhunter for christmas.G

  • You need to move your CG forward 1-2cm from the recommended point.

    Chris

  • Moderator
    Hi , speed is your insurance, in high winds increase your cruise speed by at least 3 m/s. The loss of control also shows your CG is too far back. Move it forward 1/4-1/2 inch and retry
  • Hi there yes it can happen. The stall speed is about 11m/s. Once stall it will spiral. You can try placing wing fences to help stop flow seperating.
This reply was deleted.

Activity

Gremsy liked Gremsy's profile
Mar 12
DIY Robocars via Twitter
RT @chr1sa: Donkeycar 4.4 released with tons of new features, including path learning (useful with GPS outdoors), better Web and Lidar supp…
Nov 27, 2022
DIY Robocars via Twitter
RT @NXP: We are already biting our nails in anticipation of the #NXPCupEMEA challenge! 😉 Did you know there are great cash prizes to be won…
Nov 24, 2022
DIY Robocars via Twitter
RT @gclue_akira: レースまであと3日。今回のコースは激ムズかも。あと一歩 #jetracer https://t.co/GKcEjImQ3t
Nov 24, 2022
DIY Robocars via Twitter
UC Berkeley's DIY robocar program https://roar.berkeley.edu/
Nov 24, 2022
DIY Robocars via Twitter
RT @chr1sa: The next @DIYRobocars autonomous car race at @circuitlaunch will be on Sat, Dec 10. Thrills, spills and a Brazilian BBQ. Fun…
Nov 24, 2022
DIY Robocars via Twitter
RT @arthiak_tc: Donkey car platform ... Still training uses behavioral cloning #TCXpo #diyrobocar @OttawaAVGroup https://t.co/PHBYwlFlnE
Nov 20, 2022
DIY Robocars via Twitter
RT @emurmur77: Points for style. @donkeycar racing in @diyrobocars at @UCSDJacobs thanks @chr1sa for taking the video. https://t.co/Y2hMyj1…
Nov 20, 2022
DIY Robocars via Twitter
RT @SmallpixelCar: Going to @diyrobocars race at @UCSDJacobs https://t.co/Rrf9vDJ8TJ
Nov 8, 2022
DIY Robocars via Twitter
RT @SmallpixelCar: Race @diyrobocars at @UCSDJacobs thanks @chr1sa for taking the video. https://t.co/kK686Hb9Ej
Nov 8, 2022
DIY Robocars via Twitter
RT @PiWarsRobotics: Presenting: the Hacky Racers Robotic Racing Series in collaboration with #PiWars. Find out more and register your inter…
Oct 23, 2022
DIY Robocars via Twitter
RT @Hacky_Racers: There will be three classes at this event: A4, A2, and Hacky Racer! A4 and A2 are based around UK paper sizing and existi…
Oct 23, 2022
DIY Robocars via Twitter
Oct 23, 2022
DIY Robocars via Twitter
Oct 19, 2022
DIY Robocars via Twitter
Oct 18, 2022
DIY Robocars via Twitter
RT @NeaveEng: Calling all UK based folks interested in @diyrobocars, @f1tenth, @donkey_car, and similar robot racing competitions! @hacky_r…
Oct 13, 2022
More…