Discussions

Swashplate setup on flybar system

Posted by Spencer on August 14, 2013 at 2:16pm

So I'm setting up a 450 clone with a flybar system. I flipped the blade grips so the linkage is on the leading edge of the blade (I heard this is better mechanically).

To get the swashplate to respond properly to my radio I had to reverse all three cyclic servos in the mission planner. So now the swashplate responds to my radio inputs correctly, but when I roll or pitch the heli in stabilize APM moves the swashplate the wrong directions. Do I have to undo my alteration to the blade grips or is there another way around?

Thanks

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –
Follow

Replies

  • Colin Holzman August 15, 2013 at 2:36pm
    Try flipping the servo positions in mp. That worked for me when I had that problem.
  • Spencer August 15, 2013 at 2:13pm

    I should mention that before I flipped the blade grips I had everything working smoothly. I think the problem comes from the fact that the swashplate now moves down to pitch the blades positive and vice versa. 

  • Josh Potter August 15, 2013 at 1:31pm

    Are you running your radio in heli mode or standard (plane) mode?

This reply was deleted.

Activity

Neville Rodrigues liked Neville Rodrigues's profile
Jun 30
Santiago Perez liked Santiago Perez's profile
Jun 21
More…