Replies

  • Take a look at the solder joints of those capacitors;cracked. Perhaps the mfgr owes you a refund! Looks like they are trying to hide that defect with HOT MELT GLUE! Pictures on their web site show solder defects too.

  • I fried also once a 4in1. Since then I use an additional capacitor on the power inlet pads 1000uF. Especiall if using 6S the voltage Spikes can destroy the esc. Never had issues afterwards. There are a lot of informations available in youtube i.e. from „drone mash“ about that issue. https://www.youtube.com/watch?v=xLRBl-2egpo

  • she was really unstable with the stock ArduCopter PIDs.

    Thomas Butler said:

    I wonder what caused the frying of the 4-in-1?

  • 3702458319?profile=original3702458376?profile=original3702458232?profile=original

  • Will do. BTW, here's a pic of a toasted Tekko32 that I had attached to a Kakute F4 V2:

    3702458299?profile=original

  • It's funny how this post is from 9/2017. BTW, here's a Kakute F7 all wired up.

    3702457748?profile=original

  • Many of the flight controllers typically associated with Betaflight, iNav, etc, can be flashed to arducopter.  I use a Kakute F7 all-in-one...but there are many others.  All these are FAR smaller and lighter and integrated than the Pixhawk world.  A quick calculation for me is that I saved 175 grams using the Kakute F7 as opposed to a Pixhawk, OSD, power sensor, telemetry, etc etc.

  • The one made by Sky Rocket that`s in the new Sky Viper:

    https://youtu.be/3RdEELDIeVs?t=17m25s

    This is about where Tridge shows the size of the controller board.

  • Moderator

    The Cube http://www.proficnc.com/content/13-pixhawk2

    pixhawk2.1 - Pixhawk2
This reply was deleted.

Activity

DIY Robocars via Twitter
How to use the new @donkey_car graphical UI to edit driving data for better training https://www.youtube.com/watch?v=J5-zHNeNebQ
Monday
DIY Robocars via Twitter
RT @SmallpixelCar: Wrote a program to find the light positions at @circuitlaunch. Here is the hypothesis of the light locations updating ba…
Saturday
DIY Robocars via Twitter
RT @SmallpixelCar: Broke my @HokuyoUsa Lidar today. Luckily the non-cone localization, based on @a1k0n LightSLAM idea, works. It will help…
Nov 25
DIY Robocars via Twitter
@gclue_akira CC @NVIDIAEmbedded
Nov 23
DIY Robocars via Twitter
RT @luxonis: OAK-D PoE Autonomous Vehicle (Courtesy of zonyl in our Discord: https://discord.gg/EPsZHkg9Nx) https://t.co/PNDewvJdrb
Nov 23
DIY Robocars via Twitter
RT @f1tenth: It is getting dark and rainy on the F1TENTH racetrack in the @LGSVLSimulator. Testing out the new flood lights for the racetra…
Nov 23
DIY Robocars via Twitter
RT @JoeSpeeds: Live Now! Alex of @IndyAChallenge winning @TU_Muenchen team talking about their racing strategy and open source @OpenRobotic…
Nov 20
DIY Robocars via Twitter
RT @DAVGtech: Live NOW! Alexander Wischnewski of Indy Autonomous Challenge winning TUM team talking racing @diyrobocars @Heavy02011 @Ottawa…
Nov 20
DIY Robocars via Twitter
Incredible training performance with Donkeycar https://www.youtube.com/watch?v=9yy7ASttw04
Nov 9
DIY Robocars via Twitter
RT @JoeSpeeds: Sat Nov 6 Virtual DonkeyCar (and other cars, too) Race. So bring any car? @diyrobocars @IndyAChallenge https://t.co/nZQTff5…
Oct 31
DIY Robocars via Twitter
RT @JoeSpeeds: @chr1sa awesomely scary to see in person as our $1M robot almost clipped the walls as it spun at 140mph. But it was also awe…
Oct 29
DIY Robocars via Twitter
RT @chr1sa: Hey, @a1k0n's amazing "localize by the ceiling lights" @diyrobocars made @hackaday! It's consistently been the fastest in our…
Oct 25
DIY Robocars via Twitter
RT @IMS: It’s only fitting that @BostonDynamics Spot is waving the green flag for today’s @IndyAChallenge! Watch LIVE 👉 https://t.co/NtKnO…
Oct 23
DIY Robocars via Twitter
RT @IndyAChallenge: Congratulations to @TU_Muenchen the winners of the historic @IndyAChallenge and $1M. The first autonomous racecar comp…
Oct 23
DIY Robocars via Twitter
RT @JoeSpeeds: 🏎@TU_Muenchen #ROS 2 @EclipseCyclone #DDS #Zenoh 137mph. Saturday 10am EDT @IndyAChallenge @Twitch http://indyautonomouschallenge.com/stream
Oct 23
DIY Robocars via Twitter
RT @DAVGtech: Another incident: https://t.co/G1pTxQug6B
Oct 23
More…