Fbw-a limited left bank

Posted by Serge Gonzales on April 5, 2013 at 11:10pm
Im doing tuning on a hobbyking epp fpv with arduplane 2.68 and the left bank in fbw a is severely limited. Planes flies normally on manual and stabilize but it just doesnt go left. It goes perfectly straight and right but no left bank. Pids are stock as well as roll parameters. What should i be looking at to asjust guys? And why arent some of the parameters on the tuning wiki page in testing fbw mode not in the advanced list parameters on the latest mission planner such as the lim_roll_cd?I appreciate your help guys.Regards,Serge

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –
Follow

Replies

  • Developer
    Andrew Tridgell April 6, 2013 at 1:43am

    Hi Serge,

    If you can post a tlog (telemetry log) then I can try to work out what is wrong.

    I'd also suggest you try the latest release.

    Cheers, Tridge

  • 100KM
    Hein du Plessis April 5, 2013 at 11:34pm
    How does it handle in manual? Most probably something wrong with your airframe. Are the ailerons moving correctly?
This reply was deleted.