Discussion group for ArduCopter users

3181 Members
Join Us!

You need to be a member of diydrones to add comments!

Join diydrones

Comments are closed.

Comments

  • This is the same set up as I have and the 11x4.7 fit fine on mine. You may want to reach out to 3dr or udrones and ask them what is up. It would be nice if they provided some type of guide for the set up even when they are RTF but i guess thank goodness for the community. 

  • p props in correct location now.. clearance still an issue

  • Hmm. 3DR sold me the unit with motors installed and also ordered the large prop from them@ same time..
  • Developer

    Andrew. Looks like you have a big problem. I am not sure if 3DR frames are designed for big motors and big propellers but way how they are in your hexa is bad and you cannot use it like that. all jDrones frames are fully tested with 12" propellers. I would suggest to use only 10" props on that your current hexa.

    jDrones, R/C UAVs and More....
    Manufacturer of ArduCopter frames and parts. Custom airframe manufacturing, Custom design services for all your R/C UAV needs
  • Hello.. Shiny new hexa with all the toys about to leave bench (I hope).. however prop clearance3692568322?profile=original issue! Or am I missing something.. 880 motors 11x4.7 props

    thanks

  • 2012-12-09%2020-01-10.tlog

     

    Hi Guys

    I was in the middle of tuning for my Loiter and suddenly the quad started coming down out of control and crashed. Luckily no damage but it went out of control. this is the log i appreciate if any one can help and see what went wrong. thanks

     

    2012-12-09%2020-01-10.tlog

     

  • OK I got the Loiter going almost good. I had problem with my CH_6 knob on TX. fed the info directly from the ground station. all good for now. Thanks.

     

  • @Randy

    Randy thank you for the response. Frankly I dont really know what to look for in the log. any idea what i should expect in the log? sorry I have never done this before.

  • @Avionics

    Have you reviewed the logs? That would be a good starting point to see what is happening.

    Randy

  • I have a H.A.L quad by hobby king with 1200kv motors and freshly assembled. It flies beautiful in stablise and alt Hold and when i try to loiter it doesnt hold its position. The GPS both LEDs are locked and steady before i start. It drifts and loses altitute very slowly. Tried playing with PIDs but no luck. I ran out of ideas appreciate if anyone can throw some light. Does the WP loiter config PIDs have any effect whilst on loiter or it is only for when on Auto mode? Thanks for the help in advance.
This reply was deleted.

Drone flying to non visible point

Hi there,I encountered a problem, while flying in auto mode, with approching to point that was not set by trajectory and is not visible after downloading mission from flight controller by Mission Planner. Does anybody encountered similar problem. The situation is that in the middle flight I stopped the UAV and uploaded new mission and after changing to auto mode it starts to fly in some direction. It goes straight to some point, so I assume it's not mechanical problem. I attached the link to…

Read more…
0 Replies

TAKEOFF WITHOUT USING GPS

Hi,Im working on a autonomous drones and im using JETSON NANO and flight controller PIXHAWK .Im able to control my drone by giving rc commands on the MAVLINK terminal itself by connecting it with PIXHAWK but now i want a python code from which i can do some operations like:takeoff,left ,right,forward,backward…and i am not using GPS…Can anyone please help me…

Read more…
1 Reply · Reply by tellinglean Oct 17, 2022

HELP quadcopter: one motor twitching and stuttering

Hello guys,I have a problem with one motor, do not spin and making a sound (videos in attachment), I changed the motor to another ESC and is work, so I checked the connections on ESC and all connections looking great. any ideas or something I can do, iam trying to build YMFC32 Brokking .thank youhttps://youtu.be/LagBqwGbixkhttps://youtu.be/PU20nCxApcs

Read more…
0 Replies

Will AHRS_ORIENTATION=8 for Arducopter 3.2.1 on APM 2.5 using a traditional Heli

I have been Reading Chris Olsen posts and watching his videos on Arducopter with traditional Helis using a Pixhawk.I have inherited an older Trex 450 heli with the old Align 3G FBL hardware.  The FBL controller appears to be bad.  So I have an old APM 2.5 without a compass or GPS on board.  I just want to replace the failed Align 3G FBL system with the APM.Now I have to mount the APM under the skids on the heli so the APM will be upside down.I have Two questions.1)  Is the AHRS_ORIENTATION=8…

Read more…
0 Replies