Discussion group for ArduCopter users

3168 Members
Join Us!

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • I wouldn't say altitude is your problem until it comes to the camera resolution and filtering capabilities any craft given the amount of flight time required will perform the needed altitude and allow you the decent time to land too

     

    to achieve the filtering required are there limits to distance to be effective ?

    my concern is the farther away the less likely to get results usefull

  • @Essam Your operating altitude is going to depend on the field of view of your selected lens. If you need the camera to capture a single image to cover 120 acres, and your lens has a 38 degree viewing angle, my maths say you'll need to fly at around 2200 feet AGL. A wider-angle lens will reduce that altitude, but may distort the image.

  • Hi everyone; Happy new year. I am new to this field but I am interested in building my own uav using this site support. The reason I need a UAV is for my agricultural research. I need to be able to capture a 120-acre field in one single shot/photo using a near infrared capable camera. I need near infrared because it helps identifying stressed vegetation (I would need both the red and near infrared reading to do this). I am concerned that I may need to fly too high to be able to see a 120 acre field in one shot; in this case what uav design/model would allow me to accomplish this task? I am thinking of buying a small camera and modify it so that it can capture both the red and near infrared area of the spectrum. I am on a small budget so not looking to spend thousands; especially on my first uav.. Many thanks

  • Removed as advertising.

  • I am a bit perplexed. I was helping to diagnose a problem on a friend's copter (quad) and found I could get nowhere without connecting to the APM through MP. I feel like I have a lot of experience with the APM but have not seen this. The yellow LED blinks as normal, but I get neither of the red or blue indicator leds. when I try to connect to MP i get a "No Heartbeats received" error message. I tried to connect through the CLI with no success. Would the yellow LED flash if the fuse was blown. Any suggestions are much appreciated.

     

  • @Gunnar Baardsen  you have the right gimbal, that is the one I was talking about. I use mine with a Naza controller and the servos plug directly into the X channels and doesn't need an auxiliary gyro/IMU. he APM also permits this using any free channels for up to 3 axis control.(see http://copter.ardupilot.com/wiki/camera-mount/

    If you decide on the Alware, I suggest that you replace the all plastic servos with ones with metal gears and ball bearing shaft. I am noting some lash from wear appearing. Lately I have been flying a Nikon Coolpix LX810 and I think its weight is wearing out the inexpensive servos that came with the Swing.

  • @BobKirkpatrick

    Is it this 2-axis gimbal you are referring to - http://www.alwarerc.com/shop/swing-2axis-camera-mount-p-67.html

    I read from the specs that they recommend the use of a gyro stabilization. I was under the impression that such a stabilizing feature is built-in with the APM 2.5, hence it's not needed with any additional hardware to control this gimbal.

    Or am I wrong here?? I have a 3DRobotics quad (under rebuilding to a hexa these days) that I want to equip with this gimbal with a Canon S100 PowerShot camera.

    与充气美女做爱-色狐资源最新网址地址-乱Online成人游戏下载
    www.alwarerc.com警告:未滿18岁者請勿進入韩国女同片!本站乡村小说片源丰富,内容全面!注意自我保护,适度观看电影,合理安排时间,享受健康生活!
  • 3D Robotics

    Lovely scenery! Now time for a stabilized gimbal;-) Embedding your video so others can enjoy:

  • Using my APM 2.5 on a TBS Discovery w/ frsky 2.4 control, Immersion RC 600mw 5.8 and Fatshark Dominators, its taken a few months to get the bugs ironed out and flying (many crashes and about 3 vtx's), but it now flies nicely (though I'm a crappy pilot) thanks to this user group and many other fellow hobbyist. I am getting just over a klm of range with both video and control. Missions work great and loiter is finally stable.. see my quick video in Hawaii (apologies for the jello I have my gopro hardmounted in waterproof case for obvious reasons :)  http://youtu.be/tdV1w0lNKU0 any questions feel free to ask, and again thanks to everyone who helped me :)

  • Ok, I emailed 3d robotics, they tell me approximately 1 mile, line of site, with FlySky transmitter.

    Thanks John

This reply was deleted.
E-mail me when people leave their comments –

TAKEOFF WITHOUT USING GPS

Hi,Im working on a autonomous drones and im using JETSON NANO and flight controller PIXHAWK .Im able to control my drone by giving rc commands on the MAVLINK terminal itself by connecting it with PIXHAWK but now i want a python code from which i can do some operations like:takeoff,left ,right,forward,backward…and i am not using GPS…Can anyone please help me…

Read more…
0 Replies

HELP quadcopter: one motor twitching and stuttering

Hello guys,I have a problem with one motor, do not spin and making a sound (videos in attachment), I changed the motor to another ESC and is work, so I checked the connections on ESC and all connections looking great. any ideas or something I can do, iam trying to build YMFC32 Brokking .thank youhttps://youtu.be/LagBqwGbixkhttps://youtu.be/PU20nCxApcs

Read more…
0 Replies

Will AHRS_ORIENTATION=8 for Arducopter 3.2.1 on APM 2.5 using a traditional Heli

I have been Reading Chris Olsen posts and watching his videos on Arducopter with traditional Helis using a Pixhawk.I have inherited an older Trex 450 heli with the old Align 3G FBL hardware.  The FBL controller appears to be bad.  So I have an old APM 2.5 without a compass or GPS on board.  I just want to replace the failed Align 3G FBL system with the APM.Now I have to mount the APM under the skids on the heli so the APM will be upside down.I have Two questions.1)  Is the AHRS_ORIENTATION=8…

Read more…
0 Replies

Maximum number of Lidar for Object Avoidance

Hi all,I'm setting up my PX4-based quad with ST VL53L0X Lidar sensors (I currently have three) and I noticed that line #24 of the current Rangefinder library (here: https://github.com/ArduPilot/ardupilot/blob/master/libraries/AP_RangeFinder/RangeFinder.h#L24) has the maximum number of sensors set to 10 (ten). Am I understanding this correctly? And has anyone ever tried to setup this many rangefinders (or anything close) with any measure of success?Any input/advice will be greatly appreciated.

Read more…
1 Reply