Hello,
Lost my Iris+ when I took it out for a mission today. Put it on auto to do it's mission and set the drone so that it would RTL if the battery voltage goes below 10.5 V. Needless to say it did not return. I am using APMplanner 2.0 to do the mission planning stuff.
Any advice or help would be appreciated.
Replies
Reply
just now
MC, what Paul meant, was the RTL has a height set parameter. I can't remember what the default is, but whatever it is on your rig, when/if it hit low voltage RTL, it would stop where it is, and try to climb to the pre-set altitude, "before" heading in the home direction. It could have completely drained the battery while trying to reach that altitude, and fell straight (sorta) down.
Thanks for the clarification. I set the RTL altitude to 0 to avoid any problems
Do you still have contact with the unit? If so, hit the home icon on MP....should show you on the map where it is.
Mine took off and hit a 90 foot tree....and descended through the canopy to the ground...breaking stuff along the descent
Good luck
Note: I do not have an android, therefore no tower and have only APMplanner to locate the drone.
How many flights on this iris before it flew away?