Landing RTL drone flips over ( stupid mole hill, or grass) and will not turn off. This happened to me on a landing a few times. The device will flip over and continues running, I cannot shut it off. I use down to the left, no dice in any mode. It finally killed itself. Is there a way to program a death switch? The last time it ate up a pair of blades.
I have had this happen a few times, on 2 separate drones.
Replies
Ok, how about an "it's landed" switch that will let the iris know, before it does, that it is in fact on the ground?
ps... I did get mine back in the air today :[)
I know this isn't a real answer to your question, but if I'm not sure about the landing (dirt, level, etc.) I have taken to just catching it. Many props saved. lol
Maybe this is the answer! Turn the legs into handles....
Thats a Crazy idea! I am literally going to design them now.
Just switch to stabilize with throttle down to 0 when the land code is not detecting the land and then disarm.
I'm using APM 2.6, all my missions end with RTL.
6 feet or so, I pull the throttle all the way down.
At this point, APM controls throttle, and at the moment of touching, I flick to STAB mode.
Hasn't failed me yet......
It helps to come from a "real rc heli" world :-)
+1
I do exactly the same on 2.5 and have never had a problem i also come from rc heli background
+1
Real rc heli habbits rock.
The downside is that you sometimes try to "disarm" rc heli when land. It turns to be dangerous ;)