A group for DIY Drones moderators to discuss best community management practices.
Moderator Basics
These are the basic instructions for moderators:
Most of what you'll be doing is approving (or not) blog posts and otherwise keeping things running smoothly.
With blog posts, the key things to check before approving are:
- Does the post start with an image/video or at least have one very close to the top?
- Are videos embedded? (Not a link to a video elsewhere)
- Is the post informative, rather than asking a question or a request for help? (Those should be sent to the discussion forum).
Feel free to make modest edits (such as moving a photo to the top, or turning a video link into an embed) yourself. If the post should be in the discussion forum instead, paste the text into a Friend request to the author explaining that and delete the post. (Using a Friend request will hopefully take some of the sting out of having to reject their post ;-) )
When Moderating Comments:
Deletion is really the course of last resort, and tends to cause more trouble than it solves. Instead, we follow this escalation process:
- 1st course of action in case of TOS abuse: Gentle note in the comments asking people to play nice
- 2nd: Edit the comment to remove offending piece and add: "[Moderator: Text edited to comply with site TOS]". It's nice to PM the member with an explanation, warning
- 3rd: Lock comments. Also PM member with explanation/warning
- 4th (only in cases of gross abuse): Delete comment. PM member
- 5th (very rare, and only after multiple warnings): Ban member
Our Culture and Values:
Mark Harrison, one of our star moderators, articulated our culture and policies best with this post, which I'll just quote verbatim:
Here's my general feeling about a lot of things on this site; in fact, it's pretty much my general philosophy for large parts of my life:
"It's more important to enable good things than prevent bad things"
For diydrones, this generally means:
--Be generous in accepting blog posts. We're not at a point where there are more submissions than can be confortably digested in a day. Likewise, the term "drone" is evolving at such a fast rate it's hard to pin down exactly what it means for everyone. So, I'm happy to lump in quadcopters, FPV, gimbals, RC, artistic aerial videos, electronics, radios... all kinds of stuff that meets my nebulous criterion of "generally interesting to the diy drone community."
Now of course it can be protested, "what if we're flooded by dozens or hundreds of posts on marginally related topic X?" And my response would be, "let's wait until that happens; we'll have tons more context and it will be easier to make a specific decision then than make some globally encompassing set of rules now. We may all even be a little bit smarter and a little bit wiser!"
-- Be generous in approving users. Lots of people aren't comfortable with revealing too much information about themselves, or may not have a particularly cogent reason for joining a site. I'm somewhat of an exception to this case... "Are you asking what I'm interested in? Let's talk about me, it's one of the most interesting topics we can discuss, don't you agree?" But for a lot of people, they may interested in the topic, but not interested in telling you why.
-- Feel free to make mistakes, and be nice when other people are making mistakes. Sometimes the most interesting things happen when things go awry. For better or worse, sometimes the most education things as well!
I think this is pretty much in agreement with how the site has been run historically. It's a site for amateurs, by amateurs (keeping in mind the defintion of "amateur"... from the French "lover of"), and as such has had a pretty wide-ranging scope of what's acceptable. That's served the site well, enabling it to be as relevant (or even more!) in 2013 as it was when it was founded.
Of course there are big exceptions to this "don't sweat the bad stuff" philosophy -- brain surgery, rocket launches, and skydiving come to mind -- but I think it's a useful guideline for a site such as ours.
More instructions:
You need to be a member of diydrones to add comments!
Comments are closed.
commercial advertisment post
Hi dear moderators, Recently I notice there are some " pure " advertising post from Skywalker / TopXgun ect. Where some of the post being deleted some make it to the blog post. I'm not really sure if this type of " blog " have a place here or we should delete it. As for the Skywalker, I saw their blog being deleted and a few day latter they post again with some minor modification, but still look 100% " advertisement " to me. It seems that they do " NOT " get the message or understand what their…
Read more…Scam???
Is this a scam, guy is posting on every group?http://diydrones.com/xn/detail/705844:Topic:2336557?xg_source=activity
Read more…Commercial Groups on DIYD
I think we need to discussion about 'commercial' groups like this new one i just noticed (especially since as the site is getting bigger)http://diydrones.com/group/outdoor-roboticsA quick visual search through gave me these 'commercial' looking groupshttp://diydrones.com/group/voltahttp://diydrones.com/group/ugcshttp://diydrones.com/group/uavsaShould we not be thinking that groups created by commercial enterprises require some form of sponsorship of the site or development work in the DiyDrone…
Read more…
Comments
Chris, you mean the blog? I approved it last night just before heading off to bed. Remember distinctly moving that video to the top. Definitely not a bible thumbing intent. Hope we're not thinking about scrubbing every blog with the word "Jesus" in it.
I approved the Jesus one. I think he was kidding, and it's not really meant to endorse religion.
No, I didn't. One of the other moderators did. But I approve. Too rude to be welcome here.
I think it's just a very rude student who is too lazy to do any actual research. All too common from some countries.
Yes, "his" AboutMe is a bit suspect, but the gmail address looked legit. Anyway, now that he's posted a spam status update, I'm banned him.
His "About Me" should have been the tip off!
Ron, I messaged Andy to combine the posts into one that I already approved.
There are three blog posts up for approval right that I feel should go in the my project forum. Not the front page blogs posts. I just noticed someone has put in a note to combine the posts, which would be great as well but I feel they should go in the my project forum and then Andy can post updates to his hearts cintent
I'm quite disappointed of the lack of moderation that has been applied, this results in posts that get off topic and results in mud slinging. Unfortunately trolls incite bad conduct, and members either choose to ignore or respond to these trolls. In the past I was foolish enough to give trolls on this forum opportunities to feed on my contributions, and more foolish to get caught up wasting my time with them.
Since then I haven't contributed anything for the trolls on this forum to feed off.
The only thing users can do to stop a troll is to stop feeding them.
The problem with this if more users get put off by trolls, then this forum will lose valuable members and contributions.
Moderators, don't just have the choice of ignore or feed the troll. I wish some moderators would read the terms of service and start moderating (as opposed to replying to trolls and feeding them).
Hey Ruwan, that was me, I kindof hijacked that blog post. I emailed the creator and told them.I liked the the animated look at how the linkages and drive worked...thanks for cleaning it up...I had left a couple of moderator notes there so it was clear what was happening. No problemo though.
Ron
-
287
-
288
-
289
-
290
-
291
of 353 Next