Replies

  • dimitris arampatzis October 6, 2016 at 4:45pm

    I solve the problem

    Paul i did download the 3dr config tool and i made a local firmware update but that dident help

    At the past i have change the value  TELEMETRY_DEALY from 0 tgat was in stock to 10 and everything worked very good

    For no reason this value chamge by it self and from 10 tgat i have it gone to 0

    I change this calue back to 10 and everything works as it should

    Thank you for your help and your time

    I hope this could help someone in the future 

  • dimitris arampatzis October 6, 2016 at 9:56am

    Thank you paul

  • Paul Meier October 6, 2016 at 8:51am

    http://vps.oborne.me/3drradioconfig.zip

  • dimitris arampatzis October 6, 2016 at 7:59am

    I check them with mission planner and both radios has the same values

    About the 3dr radio app what should i check for?l

    Should i reupload the firmware?

  • Paul Meier October 6, 2016 at 2:37am

    have you tried to check the radios with the MO 3DR radio app ? Maybe one of your radio has problems

  • dimitris arampatzis October 6, 2016 at 2:19am

    The antenna and the tellemetry ar away from esc or other rf noise.

    It worked ok before but suddenly it couldnt update home location amd cant saw the tellemetry rssi

    I believe its more a software problem than a hardware problem

    I have format sd but it disent help

  • David L. September 19, 2016 at 6:35am

    Keep your 3DR radio telemetry module especially the antenna away from RF noisy components.  It happens to me a lot until i place the 3dr module away from high RF interference component such as ESC, motor, power module, pdb and high voltage area.

  • dimitris arampatzis September 14, 2016 at 11:06am

    I wiil format the sd card and if this dosent solve the problem i m going to reload the firmware

    Thank you very much Paul

  • Paul Meier September 14, 2016 at 10:32am

    Dimitris, maybe its the sd card, if all else fails try reload the firmware

  • dimitris arampatzis September 14, 2016 at 10:26am

    If you have any suggest please tell me

    I want to thank you for your time

This reply was deleted.