Problems, Hints, experience, comments on the new PIXHAWK3689246135?profile=original

1155 Members
Join Us!

You need to be a member of diydrones to add comments!

Join diydrones

Comments are closed.

Comments

  • Why not simply use this. They work great and it's plug and play.
    http://store.rfdesign.com.au/rfd-900p-modem/
    RFD 900+ Modem
    RFDesign designs and manufactures the Antennas, RF Electronics and the RFD900 radio modem
  • Does anyone tried to use Microhard p900 with pixhawk?  I am trying to connect but it doesnt connect withQGC

  • hi all.

    have someone can help me to configure the pixy camera to pixhawk? 

    thank you in advance.

  • @javier cerna

    tq so much... i'll try it... :)

  • @ Phil  I have that issue with 'plane' I have spent hours trying to get it to read correctly and not give me the warning!!! Drives me nuts!! Please post back if you get it sorted out. thx

  • Hi Javier

    I've calibrated the battery monitor as per your link and it is reading correctly, however it is the constant low battery warning that is the issue. It is sounding when it shouldn't.

  • @arif

    The firmware is compiled using the PX4 Toolchain, from the source code in https://github.com/ArduPilot/ardupilot. Please check the following guide for more information: http://ardupilot.org/dev/docs/building-px4-with-make.html

    @Phil Horner

    Maybe your battery monitor is not well calibrated. Please check http://ardupilot.org/copter/docs/common-power-module-configuration-.... In particular, you can input the voltage you're reading (23 V). 

    ArduPilot/ardupilot
    ArduPlane, ArduCopter, ArduRover source. Contribute to ArduPilot/ardupilot development by creating an account on GitHub.
  • Hi all

    I'm having a problem with the low battery warning function on my Pixhawk. On the HUD screen in Mission Planner, at the bottom where it shows the battery voltage and amps, it is always in red and issuing warnings that the battery is low ie, 21volts. Yet the Voltage is actually reading correctly at 23 volts. Can someone please point me to a link that demonstrates what I can do to fix this issue? I must have altered a parameter at some stage, because it used to work flawlessly.

  • hello guys..

    i new in UAV.. 

    i have project to do with pixhawk and pixy camera. can someone teach me how to edit the firmware or how to see all the coding that been upload in my pixhawk..

    hope someone can help me... thank you..

This reply was deleted.

Making a phototransistor cable for Canon S110

I want to make a phototransistor cable for my S110 to attach infront of its red eye LED light and connecting it to pixhawk in order to imporve the geotagging process. But I am fairly new with electronic, wiring and soldering stuff.Thus I need help and guidance on how to properly make one. I want to know is this the right connection for me to make the cable.Any help is really appreciated. Thank you.

Read more…
0 Replies

Hexa with Hobbywing X8 motors

Hii am building a hexacopter with1.) hobbywing x8 motors2.) flight controller pixhawk PX53.) battery 12s 22Ah4.) wheel base of around 1800mm5.) estimated weight around 17kg without payloadi am looking if anyone has already tuned this type so i can get a head start. looking forwardthank youMike

Read more…
0 Replies

TAKEOFF WITHOUT USING GPS

Hi,Im working on a autonomous drones and im using JETSON NANO and flight controller PIXHAWK .Im able to control my drone by giving rc commands on the MAVLINK terminal itself by connecting it with PIXHAWK but now i want a python code from which i can do some operations like:takeoff,left ,right,forward,backward…and i am not using GPS…Can anyone please help me…

Read more…
0 Replies

Flashing in Pixhawk

Hi everyone,Recently I've got my first pixhawk CUAV v5+. I'm amazed to see one thing that through one USB port only we can flash code and read the logging data. To understand how is it working I started looking schematic but didn't understand anything. Can someone please tell how is that working?

Read more…
0 Replies