Gender
Male
About
Location
Toulouse
About Me:
Aerospace Engineering student
Please tell us a bit about your UAV interest
They are very versatile and have numerous applications. Hence its very interesting to work on drones. I would like to learn and later build my own drones that could be used for world-changing ideas.
Hometown:
India
Activity Feed
"I think so,
add these lines to config.txt
enable_uart=1dtoverlay=pi3-disable-bt
and make sure your baud rate is 57600 and use /dev/ttyAMA0 and not /dev/ttyS0.
I did this and it worked! good luck"
add these lines to config.txt
enable_uart=1dtoverlay=pi3-disable-bt
and make sure your baud rate is 57600 and use /dev/ttyAMA0 and not /dev/ttyS0.
I did this and it worked! good luck"
"Hi Anton Lidbom, I am stuck at same stage. I get link 1 down and then keep getting "no link". Did you manage to find a solution?
Thanks for sharing."
Thanks for sharing."
Hello,I am trying to connect Rpi 3 Model B to flight controller (Dropix) and establish communication between them. I am following http://ardupilot.org/dev/docs/raspberry-pi-via-mavlink.html page.I have flashed APSync image on SD card. When I…
