Gender
Male
About
Location
Gothenburg
Please tell us a bit about your UAV interest
I am currently building an UAV for the Swedish Sea Rescue Society (SSRS) that is intended to perform autonomous missions for search and rescue purposes.
Hometown:
Gothenburg
Activity Feed
Hi!I've just ordered a Navio+ from Emlid and want to be able to control a 3 axis gimbal using the SToRM32 gimbal controller. After some reading I get the impression that the SToRM32 preferably should be used with the Pixhawk autopilot and that the…
"Thanks for your reply! I actually used this very same ESC with the Pixhawk before without having this problem, however I have changed the motor. I've also tried to arm the Pixhawk immediately at boot (since I heard this approach worked for some…"
Hi!I'm having some trouble getting the Pixhawk to control the motor on my flying wing. The ESC keeps beeping at boot and I am not able to control the throttle at all. Initially I thought it was an ESC calibration issue, but I have successfully…
"I'm using the PX4 flight stack and to my knowledge there is no fixed wing autotune mode for that? Now that I think of it, how do you tune without flying autonomously in PX4?"
Hi!I just bought a Hercules Pusher 63" flying wing and intend to fly it autonomously by using my Pixhawk/PX4 autopilot. However, I have no experience with flying RC planes which makes the tuning of the controller rather difficult. I've decided to…
"Thanks for your input! Think I might try a large flying wing for this application, possible the Mother Ship:
https://www.flyingfoam.com/content/mother-ship-0
or maybe even the SkyWalker x8!"
https://www.flyingfoam.com/content/mother-ship-0
or maybe even the SkyWalker x8!"
"I'm using UDP and run the connection through a VPN tunnel so that the IP never changes. Although, that shouldn't matter since the mavproxy is directly connected to the autopilot via the telemetry port. Restarting mavproxy automatically could…"
