Gender
Male
About
Location
Crete
About Me:
Jewelerer in profession, Aviation Enthusiast
Please tell us a bit about your UAV interest
I am new in RC, less than a year, flying 3D and F3A planes. I feel its time for the next step
Activity Feed
"Is this version officially compatible with 3DR Iris+? I made a couple of test flights including circle, waypoints and follow me and other than gimbal control seemed to be ok."
"http://www.giatrakos.gr/index.php?cPath=341_365&sort=1a&fil...
Are these the same you use?"
Are these the same you use?"
"Our differences are:
1. I use a FU G3 2 axis gimbal and before I had a Walkera Q-2D, both mounted on the Tarrot adapter 3DR provides for gimbals. On both had the same problems. So DYS gives me litle hope. The gimbal looks stiff anyway
2. My…"
1. I use a FU G3 2 axis gimbal and before I had a Walkera Q-2D, both mounted on the Tarrot adapter 3DR provides for gimbals. On both had the same problems. So DYS gives me litle hope. The gimbal looks stiff anyway
2. My…"
"Results after searching a lot in the forum and testing.
As I said I experienced vibrations only in Loiter mode and Auto. Alt Hold is almost perfect. So I adopted the advise in another post in this forum and I replaced Loiter with Position Hold witch…"
As I said I experienced vibrations only in Loiter mode and Auto. Alt Hold is almost perfect. So I adopted the advise in another post in this forum and I replaced Loiter with Position Hold witch…"
"I also experiance severe vibrations but only in LOITER and AUTO modes and as long as it moves. When it hovers to a position the image is crystal clear. In Alt Hold the image is almost perfect and there are almost no vibrations at all. In some…"
"Good idea I ll try that also!"
"Thank you Grispin for you answers! It's not an airport but an industrial area 60km from the nearest airport. So I guess it's the criteria on your first answer that I don;t meet and that was a great relief for me!
Thank you again!"
Thank you again!"
"Just followed the procedure at home,Failsafe is activated, first short and then long, but the motor does not start. Any comments on that before I go for field test? "
