Just for curiosity, is possible to use EDF as the engines to quadricoptero?like this onehttp://www.hobbyking.com/hobbyking/store/__22946__Hobbyking_50mm_Alloy_EDF_V2_4200kv_4s_Version_.htmlThanks
After a short circuit, which burned 4 ESC, I'm afraid to turn on the equipment again.Is there any way to turn only part of the equipment and perform individual tests.Example.Connect only the APM2 and verify that their outputs are working.Connect…
Hi everyone,Is it possible user this sensor HC-SR04 Ultrasonic Sensor Distance Measuring Module instead of the actual sensor (MB1000 LV-MaxSonar-EZ0)?Or use this for object avoidance?
After installing the module 3dr, one of my ESC burnt.It was just coincidence or is there some link with the install of this module?The control wire of the ESC was close to the 3dr module .
How flat the quad need be to fly in good balance?I cant get the quad to take-off without drifting!I think the airframe is tuned. Thanks This is the video of my take-off http://www.youtube.com/watch?v=s1QaDZyhRhM
42kHz Ultrasonic sensor measures distance to objects
RoHS Compliant
Read from all 3 sensor outputs: Analog Voltage, Serial, Pulse Width
Virtually no dead zone, objects closer than 20 cm range as 20 cm
Resolution of 1 cm
Operates…"
If for each waypoint you use a more detail, the number of waypoints will be reduced, if you use less details the number will raise and you could have any combination of waypoint with full and less details."